D-Link DFP 410X - Expansion Module

Description :

The D-Link DFP 410X is a 10-Gigabit XFP module which is compatible with DGS-3400 series gigabit switches.

The D-Link XFP module provides high-speed 10-Gigabit connection on the secure fiber cable. It provides a single or dual XFP slots and can be slid into an open slot of a D-Link Gigabit switch. A number of 10Gigabit transceivers are available for selection for installation in the XFP slot. Data transfer is operated in the full-duplex mode at 20 Gigabits per second on either the multi-mode or single-mode fiber network cable, depending on the type of transceiver being installed.

The D-Link XFP module allows flexible deployment of 10-Gigabitconnection and is ideal for bandwidth-hungry applications that can meet greater cable distances and low signal interference requirements in the Local Area Network, Wide Area Network and Metropolitan Area Network.

http://gallery.techarena.in/data/516/DEM-410X.jpg

Product Features :

• 1 XFP Slots for Installation of XFP Transceivers
• Up to 20Gbps Full Duplex Per Port
• IEEE 802.3ae Compliance
• Installable in DGS-3400 and DXS-3300 Series Gigabit Switches
• Supports XFP MSA Compliant Transceivers
• Ideal for Server/LAN Backbone (300 m Fiber Cable Distance), Campus Backbone (10 km Fiber Cable Distance), WAN & MAN Deployment (40 km Fiber Cable Distance)

Benefits :

• Transfer Rate/Max Distance : 10 Gbps
• Band/Standards : IEEE 802.3ae
• Interfaces/Slots Total (Free) : 1 ( 1 ) x XFP
• Compatible Slot/Host Connection : 1 x Expansion Slot

Main Specifications :

Device Type : Expansion module
Form Factor : Plug-in module
Data Link Protocol : 10 Gigabit Ethernet
Data Transfer Rate : 10 Gbps
Compliant Standards : IEEE 802.3ae

Extended Specifications :

General

• Device Type : Expansion module
• Form Factor : Plug-in module

Networking

• Connectivity Technology : Wired
• Data Link Protocol : 10 Gigabit Ethernet
• Data Transfer Rate : 10 Gbps
• Features : Full duplex capability
• Compliant Standards : IEEE 802.3ae

Expansion / Connectivity

• Expansion Slots Total (Free) : 1 ( 1 ) x XFP
• Compatible Slots : 1 x Expansion Slot

How to enable file sharing with other computers ?

Before following the instructions below, make sure that you have already installed and configured your network adapter and its drivers.

Step 1
Start up Windows. If you are asked to log in, be sure to enter your user name and password. Click the Start button. Select Settings and Control Panel and click the Network icon.

Step 2
Click on the Configuration Window tab. If you see File and printer sharing for Microsoft Networks in the list of items that appears, close the Control Panel and go to Enabling File Sharing or How to Share Printers below. Otherwise, go to step 3.

Step 3
Click on the File and Print Sharing button.

Step 4
If you want other users to be able to access your files, use your mouse to put a check mark next to the I want to be able to give others access to my files option. If you want others to be able to use printer(s) that are plugged into your computer, put a check mark next to the I want to allow others to print to my printers option. When youre finished, click OK. Youll now see the File and printer sharing for Microsoft Networks line in the Configuration list box. (If you dont see it, you might need to use the scroll bars to scroll through the list). Click OK. When asked if you want to restart your computer, click Yes.

Enabling File Sharing

After following steps 1-4 above, double-click the My Computer icon. A window of available disk drives will appear. Using your right mouse button, click once on the drive, or open the drive and right click on the folder that you want to make available to other users. Click Sharing and then click the Sharing tab. Click Share As. Enter your drive or folder name in the Share Name box (you can call it whatever you want--Marys Computer, etc.).

Next, decide on the type of access that you want to give other users. Read-Only access lets other users view the files on your PC. Full access lets users create, change, or delete files on your system. Depends on Password lets users have Read-Only and/or Full access, depending on the password that you decide to share with them.

Use your mouse to select the type of file sharing access that you want other users to have. If you want to assign access password(s), type them into the Password box(es). When youre done, click the Apply button. Then, click OK. Your drive(s) can now be accessed from other users whenever they click on their Windows 95 Network Neighborhood icons. If a user tries to access one of your drives thats password-protected, he or she will be asked for the appropriate Read-Only or Full access password. After the item is shared you will see a hand appear underneath the folder or hard disk.

You do not need to set up anything on the switch in regards to file/printer sharing on local network. If you are having troubles with file sharing or Internet sharing on your network, you need to modify some settings in Windows.

Slow data transfer speeds

The first thing to check is the cable's pinout. Make sure that you are using category 5 UTP or STP cables and the pin layout follows Fast Ethernet requirements (pins 1&2 and 3&6 are pairs. See the example below). Make sure that the cable length is not more than 100m. For Gigabit connections network cable Cat.5E or Cat.6 is recommended.

Example of Pin Layout :

1- white/orange
2- orange
3- white/green
4- blue
5- white/blue
6- green
7- white/brown
8- brown

Please note that the cable with incorrect pinout will work OK on 10 Mbps connection. 100Mbps connection may work on shorter cables (e.g 2m) but will fail on longer cables.

Performance Specifications :

Data Rate and Operation
- 20 Gigabits per Second (Full-duplex)

Transceiver Support
- DEM-421XT (Up to 300m on multi-mode fiber cable)
- DEM-422XT (Up to 10km on single-mode fiber cable)

Dimensions (WxDxH)
- 2.2in x 5.9in x 1.1in (56mm x 150mm x 28mm)

Weight
- 0.4 lbs (0.18 kg)

Temperature
- Operating: 32° to 104°F (0° to 40°C)
- Storage: -13° to 131°F (-25° to 55°C)

Humidity
- Operating: 10% ~ 90% RH Non-condensing
- Storage: 5% ~ 90% RH Non-condensing

Emissions
- FCC Class A
- CE
- C-Tick

Warranty
- 2 Year Limited

Ordering Information :
DEM-410X (part number) - 1 Port 10GE XFP Module (desciption)

Compatible Transceivers :
DEM-421XT • 10Gigabit XFP (10GBASE-SR)
DEM-422XT • 1-10Gigabit XFP (10GBASE-LR)

Conclusion :

Download Information :

To download manuals, quick install guide, setup guides, firmaware, drivers, software, SNMP for D-link DEM-410X.
Click on the this : link

Here's the step-by-step guide for installing D-Link DEM 410X driver.

1. Download file for D-Link DEM 410X from our site, save it on your computer and unzip.
2. Connect your D-Link DEM 410X to computer.
3. Right click on My computer and click Properties. Go to Hardware tab. Click to Device Manager button.
4. Find your new D-Link DEM 410X on Network adapters category double click on device and press Reinstall Driver button.
5. Select Install from specific location, check Include this location and click Browse button to select the D-linkdriver click Next button to continue and click Finish button to finish installation.
6. After this procedure you should see new D-Link DEM 410X in Network adapters inside device manager.