Printable View
I have Windows Vista Ultimate on my desktop. I use broadband internet on my computer, Now i got a Laptop for myself and i wan't to connect to the internet through the router that i have. But Vista on laptop won't show up the wifi connection. There router is connected by CAT5 wire to my desktop computer. I know that my router is working fine. Any ideas? Please help...
Are you sure about the router? Is it really working fine? If yes then you must enable wifi on the router. You can do the configurations from the desktop that is wired to the router. Just make sure you enable wifi and use a WEP or WPA protection to stop intruder from connecting into your router. All the best!
I have never configured the router before. I have a netgear router. I thought routers are just plug and play. Well can anyone help me with the configuration of my router, will be very helpful... My router is Netgear WGR614 54Mbps 802.11g
Configure your router via Internet Explorer or any web browser like Mozilla Firefox, Opera, etc...
- Log in to router web interface using http:\\192.168.0.1 or http:\\192.168.1.1 (depending upon the ip address of the router)
- username : admin ,Password : admin (unless changed)
- Click wireless settings under setup
- Make security as WEP
- Security type : automatic
- Encryption strength : 64 bit
- Put a check mark on key 1 & typein any 10 digit key & apply the settings.
- Then from your wireless computer try connecting to your wireless network which will prompt you to enter the wep key.Just enter the 10 digit key & confirm the same and click connect.
- Now you have enabled wep for your wireless network and it's secure.
i have this router
tried to connect online a diablo wifi cam without success
so the router has to be enabled for wifi??
went on the netgear site and looked at a few things.....
lost my wired ethernet connections on my computers!!!
now can only use the modem ethernet direct to main computer
what the hell have i done!!!!!!
help!!
cant go online with other devices now
im a plonker for dabbling with things i don't understand!!!!!
Hi medway,
Do you mean that you have a Netgear WGR614 54Mbps that you cant connect online to a diablo wifi cam? I think that you must first enable WEP in Diablo configuration and enter password. You can also try to put a manual ip address that had worked for me like below:
routers ip is 192.168.1.1
ip address : 192.168.1.16
subnet mask: 255.255.255.0
router: 192.168.1.1
primary DNS: same as router id
secondary DNS: 0.0.0.0
thanks for that..
no... the router itself isnt connecting to the net
im stuffed!
thanks for reply:rolleyes: