could not sync no time data was available
I have a windows 2008 pdc (emulator) that is configured to get its time from
an internal linux server. When I run the following command I get the error
that a sync could not occur.
C:\Users\adminuser.VGEI>w32tm /resync /rediscover Sending resync
>> command to local computer The computer did not resync because no time
>> data was available.
The next thing I tried was to manually set the time server from which to get
the time on the pdc.
>> C:\Users\adminuser.VGEI>w32tm /config /manualpeerlist:<linux machine IP>
>> /syncfromfl ags:manual /reliable:yes /update The command completed
>> successfully.
It appears to take the command, but the next command states otherwise
>> C:\Users\Administrator.VGEI>w32tm /query /status Leap Indicator: 0(no
>> warning)
>> Stratum: 1 (primary reference - syncd by radio clock)
>> Precision: -6 (15.625ms per tick)
>> Root Delay: 0.0000000s
>> Root Dispersion: 10.0000000s
>> ReferenceId: 0x4C4F434C (source name: "LOCL") Last Successful Sync
>> Time: 5/14/2009 4:06:15 PM
>> Source: Local CMOS Clock
>> Poll Interval: 6 (64s)
Please advise on how to correct.
Re: could not sync no time data was available
Hello VGE,
Is the linux machine also a domain member?
Best regards
Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
> I have a windows 2008 pdc (emulator) that is configured to get its
> time from an internal linux server. When I run the following command
> I get the error that a sync could not occur.
>
> C:\Users\adminuser.VGEI>w32tm /resync /rediscover Sending resync
>
>>> command to local computer The computer did not resync because no
>>> time
>>>
>>> data was available.
>>>
> The next thing I tried was to manually set the time server from which
> to get the time on the pdc.
>
>>> C:\Users\adminuser.VGEI>w32tm /config /manualpeerlist:<linux machine
>>> IP>
>>>
>>> /syncfromfl ags:manual /reliable:yes /update The command completed
>>>
>>> successfully.
>>>
> It appears to take the command, but the next command states otherwise
>
>>> C:\Users\Administrator.VGEI>w32tm /query /status Leap Indicator:
>>> 0(no
>>>
>>> warning)
>>>
>>> Stratum: 1 (primary reference - syncd by radio clock)
>>>
>>> Precision: -6 (15.625ms per tick)
>>>
>>> Root Delay: 0.0000000s
>>>
>>> Root Dispersion: 10.0000000s
>>>
>>> ReferenceId: 0x4C4F434C (source name: "LOCL") Last Successful Sync
>>>
>>> Time: 5/14/2009 4:06:15 PM
>>>
>>> Source: Local CMOS Clock
>>>
>>> Poll Interval: 6 (64s)
>>>
> Please advise on how to correct.
>
Re: could not sync no time data was available
The linux ntp server is not a domain member.
"Meinolf Weber [MVP-DS]" <meiweb(nospam)@gmx.de> wrote in message
news:ff16fb66240aa8cba304d9b27c05@msnews.microsoft.com...
> Hello VGE,
>
> Is the linux machine also a domain member?
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and
> confers no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>> I have a windows 2008 pdc (emulator) that is configured to get its
>> time from an internal linux server. When I run the following command
>> I get the error that a sync could not occur.
>>
>> C:\Users\adminuser.VGEI>w32tm /resync /rediscover Sending resync
>>
>>>> command to local computer The computer did not resync because no
>>>> time
>>>>
>>>> data was available.
>>>>
>> The next thing I tried was to manually set the time server from which
>> to get the time on the pdc.
>>
>>>> C:\Users\adminuser.VGEI>w32tm /config /manualpeerlist:<linux machine
>>>> IP>
>>>>
>>>> /syncfromfl ags:manual /reliable:yes /update The command completed
>>>>
>>>> successfully.
>>>>
>> It appears to take the command, but the next command states otherwise
>>
>>>> C:\Users\Administrator.VGEI>w32tm /query /status Leap Indicator:
>>>> 0(no
>>>>
>>>> warning)
>>>>
>>>> Stratum: 1 (primary reference - syncd by radio clock)
>>>>
>>>> Precision: -6 (15.625ms per tick)
>>>>
>>>> Root Delay: 0.0000000s
>>>>
>>>> Root Dispersion: 10.0000000s
>>>>
>>>> ReferenceId: 0x4C4F434C (source name: "LOCL") Last Successful Sync
>>>>
>>>> Time: 5/14/2009 4:06:15 PM
>>>>
>>>> Source: Local CMOS Clock
>>>>
>>>> Poll Interval: 6 (64s)
>>>>
>> Please advise on how to correct.
>>
>
>