RJ45 network and WiFi

Hello everyone,

I have on my laptop internet connection cable RJ45 law. I would give my connection to another laptop that the WiFi signal. How can I do that?

thank you

According to me you need to configure the mail gateway.
and check that your machine IP on the network is fixed.Then on the second PC to the address of the first bridge.

Normally it should be good, still share the Internet connection but it should not normally cause any concern.

I tried but the connection does not always tranverse to the other machine.

Here is my case:
on the machine with the connection
Map 1: With all the connection settings (static IP)
Map 2: on the same machine (wireless)

where we want the connection.
Map 3: wifi on the other machine
Map 4: map network

how do I configure these cards.

Hello,

Depending on the configuration of your network (box, modem), you can not make a bridge.

The easiest way is to use AnalogX Proxy to be installed on the PC that will bridge the client connect to a proxy server that will be the gateway computer.

Now, in order to advise you, should be ample information on your configuration: Modem.

Best regards

So try following the Steps here:
Map 1 you touch anything.
Map 2 you create a bridge with the card 1.

Map 3 you configure the card to reach the 2 per wifi.
Map 4: no configuration, you left side.