Printable View
I have a problem with a headset that I bought as I talk with friends on skype microphone was necessary, therefore I bought a special branch I skype it tells me to connect a microphone and when I want to use skype or other there is nothing fair SoundMAX
help me
If you turn your PC configuration in your signature, that we move forward.
On my opinion, this is a configuration problem HD audio driver.
Did you check the properties of the micro Hight definition audio devices for recording? If you have a webcam, micro USB disabled because it is either the one or the other.
You can always try your microphone on another PC to be relieved of your purchase.
So here it is my config:
Operating System Windows XP Professional (build 2600) Service Pack 3
AMD Athlon (tm) 64 Processor 3000 +
Motherboard ASUSTeK Computer INC.. A8N-VM Rev 1.xx
Memory 1535 MB (2 strips)
6L080L0 Maxtor hard drive (76.33 GB)
Graphics Cards [GeForce 9400 GT]
Is this not just a bad connection on the PC. Let me explain:
it connects to the computer with 2 males: we must look at these two males taken "because one is slightly striated in red on his end and this sheet with the red should be connected on the "female" pink, and one course in the green socket.
I met your problem at the beginning and it was because I pressed the 2 males taken improperly. Since it works like clockwork.
Good day.
To check the microphone settings, go into Control Panel / Sounds, Speech, Audio Devices, in icons, choose Sounds and Audio Devices. Click on the "Audio" tab. In the "Audio recording, selected your sound card. (Normally it is Realteck AC 97). By clicking on the tab" Volume ", make sure the microphone volume box is selected.
I tested as you told me but it is not marked SoundMax Realtek HD Audio I
And I already tested with other microorganisms such and not
Therefore chosen SoundMax HD audio I
In its properties (audio or multimedia):
SoundMAX HD Audio O shall be read and I Soudmax HD audio for the recording (voice-micro).
Click on the tab "Playback" box "Mute" must be checked under the microphone volume.
On registration, the "Select" should be checked.