Hercules Wifi adapter for Livebox

Hello,

Yesterday I bought a wireless adapter-54 Hercules HWGUSB2 for Livebox. I installed the software that came with it. The hardware is supported and the network is detected. I entered the WAP key (without fault) but there is no Connection, and to say more exactly when I think the connection is established, it disconnects after 2 seconds. I Have tried everything since yesterday evening, as I know ...please Help me Solve this Thank in advance

Hello , Follw this Step to solve your problem

1. Start -> Run
   
   
2. Type in services.msc
   
   
   
3. Click the OK button, which will bring up the following dialogue.
   
   
   
4. You may want to maximise the screen. Scroll down to Wireless Zero Configuration and select it.
   
   
   
5. You now have the option to Stop the service.
   
   
6. You also need to change the Startup Type from Automatic to Manual.
   Action -> Properties
   
   
   
7. Change the Startup type from Automatic to Disabled.
   
   
   
8. Click OK.
   
   
9. You can now use your wireless adapters.

Hello , If you can't see the wireless, get close, turn off security, turn on SSID broadcasts, and make sure the wireless is turned on for the computer and on the router. If you do a "scan for networks", you should see yours if the card is working. If you on't, check to see if the lights are blinking on your wireless card or the router, and if not, check the drivers for the card.

Yes, you have to manually start the service, or you can just pull out your Wireless adapter and plug it in again. If that doesnt work, then go to network then right click your wireless connector and do repair. If that still doesn't work, then go to connections and there should be a tip on how to repair it

Hello , Do you have any other wireless connections? If so, you might try deleting it because it seems to me that WinXP will only allow one wirless connect.