Printable View
Hello Friends,
I have HATHWAY broadband connection, I used to surf internet through this broadband connection, i checked for others IP Address which simply shows on users profile, it shows their IP address and I consider that would be there routers IP address, but I also want to check my routers IP Address, how can i check that, please suggest simple way to check IP Address.
Thanks
The EASIEST way is just type cmd in Vista Search box and type "ipconfig /all" and look for your Default Gateway.
example:
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : xxx.xx.xxx
Description . . . . . . . . . . . : Intel 21140-Based PCI Fast Ethernet Adapt
er (Emulated)
Physical Address. . . . . . . . . : ff-ff-ff-ff-ff-ff
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::d554:274d:caa8:d548%8(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Monday, February 25, 2008 7:28:36 AM
Lease Expires . . . . . . . . . . : Thursday, April 02, 2144 6:57:04 PM
Default Gateway . . . . . . . . . : 192.168.0.1 <-- IP Address of your Router
DHCP Server . . . . . . . . . . . : 192.168.0.1
DHCPv6 IAID . . . . . . . . . . . : xxxxxxxx
DNS Servers . . . . . . . . . . . : xx.xx.xx.xx
NetBIOS over Tcpip. . . . . . . . : Enabled
The internal, LAN-IP address is normally set to a default, private number. Linksys routers, for example, use 192.168.1.1 for their internal IP address. D-Link and Netgear routers typically use 192.168.0.1. Some US Robotics routers use 192.168.123.254, and some SMC routers use 192.168.2.1. No matter the brand of router, its default internal IP address should be provided in documentation. Administrators often have the option to change this IP address during router setup. In any case, however, the private LAN-IP address remains fixed once set. It can be viewed from the router's administrative console.
Another way to identify the public IP addresses of routers, involves executing a ping or "traceroute" command. From inside a home network, the (DOS) command "ping -r 1" will send a message through the home router that will cause its IP address to be displayed. For example, "ping -r 1 www.yahoo.com" should result in a message like the following displayed on the command prompt:
Reply from 66.94.230.43: bytes=32 time=294ms TTL=56
Route: 209.179.21.76
...
In this example, the IP address after "Route:" (209.179.21.76) corresponds to the router WAN address.
try this command arp -a
Returns something like this
***************
Interface: 192.168.1.2 --- 0x2
Internet Address Physical Address Type
192.168.1.254 00-04-ed-42-01-29 dynamic
***************
In the above 192.168.1.254 is my modem/router and 192.168.1.2 is my desktop
Disconnect the ADSL and then try going to the web interface, bridge mode could be a problem.
Yes 192.* is for internal networks
RESET is your friend as a last resort