Printable View
hi there
I am in search of a new processor as i think my processor is not so efficient; thus i wanted to buy a new one. I heard about AMD Athlon 64 FX-57 and I am currently using amd one. So i have a good trust on amd.
can anyone please help me in finding some information regarding this processor.
As i need it urgently, please help me in getting some views on it
your views will be appreciated
The Athlon 64 FX-57 has raised the frequency of this series by 200MHz. It means AMD’s processors have reached 2.8GHz clock rate. This CPU is traditionally equipped with a 1MB L2 cache and a dual-channel memory controller that supports DDR400 SDRAM, and is intended for ordinary Socket 939 mainboards. This combination of characteristics means only one thing: this processor is based on the San Diego core which is a close relative of the currently popular Venice. So, the Athlon 64 FX-57 has got all the advantages of this core, particularly SSE3 support and the improved memory controller that boasts a higher performance and enhanced compatibility.
General Specification of AMD Athlon 64 FX-57 Processor:
Ordering P/N: ADAFX57DAA5BN
Frequency: 2.8 GHz
Packaging: 939-pin organic micro-PGA
L2 Cache: 1MB
Memory Controller: 128-bit, Dual Channel
Supported Memory: DDR400 SDRAM
Hypertransport Frequency: 1 GHz
Core Stepping: E4
Process Technology: 90 nm, SOI
Transistor count: 114 million
Die Size: 115 mm2
Thermal Power: 104W
Max Temp: 63oC
Voltage: 1.35V - 1.4V
AMD64 Support: Yes
NX-bit Support: Yes
Cool’n’Quiet Support: Yes
AMD has launched its latest and greatest desktop processor, the AMD Athlon 64 FX-57. As the name suggests, the FX-57 is a faster variant of the FX-55, raising the core speed from 2.6GHz to 2.8GHz.
The FX-57 continues to use the Socket 939 form, with 1MB of L2 cache. It uses a core which has completed the transition from the 130nm Clawhammer to the 90nm San Diego that was started with FX-55. Besides making the core physically smaller, as the transistor count is unchanged at 114 million, the San Diego adds SSE3 instructions and also has an improved memory controller.
The memory controller for Opteron and Athlon 64 processors is inside the processor core, instead of being in the motherboard chipset, but this is an enhancement rather than a wholesale change. FX-57 still uses DDR memory, rather than DDR2, but you should now be able to plug in four modules of memory without suffering from incompatibility problems that cause your memory to clock down in speed.
In the past when AMD has introduced a new FX processor it has discontinued the previous model, so there isn't a family of FX processors but instead the FX sits at the top of the Athlon 64 family, offering the ultimate in desktop performance for gamers.
As with previous FX processors the clock multiplier is unlocked, so AMD fully expects that you'll be overclocking your new processor, in which case you'd better have a decent power supply and a top-notch motherboard which can supply up to 80A to the processor.
The AMD Press kit that we received consisted of the FX-57, an Asus A8N nForce4 SLI motherboard and 1GB of Corsair CMX512 memory in two modules. Unfortunately the BIOS that was installed did not allow any overclocking which rather defeated the object of the exercise, however we were able to run benchmark tests that showed the FX-57 would be equivalent to an Athlon 64 4200+ and is very, very fast indeed. But at that price, it ought to be.