Our main office has LAn Ip 192.168.0.0/24 and we are going to connect another branch office with IP 192.168.0.3/24 by 2 mbps leased line and 1841 cisco router.Can anybody provide me the configuration of router for the same.
Printable View
Our main office has LAn Ip 192.168.0.0/24 and we are going to connect another branch office with IP 192.168.0.3/24 by 2 mbps leased line and 1841 cisco router.Can anybody provide me the configuration of router for the same.
For the configuration:
Do this:
en
conf t
config-register 0x2102
What WIC's are you trying to use?
btw, a write memory (or wri me) will save you a lot of trouble instead of doing copy run start
When the router boots it should tell you pretty quick if there are unsupported cards installed, look for this. Sometimes it's an IOS change but usually it's because the card is completely incompatible for the router or the card is tool old (such as the WIC-1DSU-T1 v1).
I guess you don't understand what a network address is!? if u say you have one network with 192.168.0.0/24 then 192.168.0.3 is a part of the same network! your second network may be 192.168.1.0/24 or 192.168.3.0/24. What router configuration do u actually need? be more specific about what routing you want to use. i hope u know what Dynamic routing is! [RIP, IGRP, EIGRP].
Cisco Router configuration
Router>enable
Router#config
Router(config)#hostname N115-7206
N115-7206(config)#interface serial 1/1
N115-7206(config-if)ip address 192.168.155.2 255.255.255.0
N115-7206(config-if)no shutdown
N115-7206(config-if)ctrl-z
N115-7206#show interface serial 1/1
N115-7206#config
N115-7206(config)#interface ethernet 2/3
N115-7206(config-if)#ip address 192.168.150.90 255.255.255.0
N115-7206(config-if)#no shutdown
N115-7206(config-if)#ctrl-z
N115-7206#show interface ethernet 2/3
N115-7206#config
N115-7206(config)#router rip
N115-7206(config-router)#network 192.168.155.0
N115-7206(config-router)#network 192.168.150.0
N115-7206(config-router)#ctrl-z
N115-7206#show ip protocols
N115-7206#ping 192.168.150.1
N115-7206#config
N115-7206(config)#ip name-server 172.16.0.10
N115-7206(config)#ctrl-z
N115-7206#ping archie.au
N115-7206#config
N115-7206(config)#enable secret password
N115-7206(config)#ctrl-z
N115-7206#copy running-config startup-config
N115-7206#exit
http://www.cisco.com/en/US/products/...configure.html
Here are the detailed, step-by-step instructions for configuring a Cisco 1841 router, including configuration examples, network diagrams, and technical concepts. Hope this will help you.
Thanks Snake08,I made a mistake .The branch office network will be 192.168.3.0/24.I want cisco 1841 router configuration.The branch office will connect to the main office by a 2 mbps leased line .I think can use static routing also becoz it is a simple network.Please suggestQuote:
Originally Posted by Snake08