Printable View
I have taken advantage of a good opportunity to replace my TeamGroup Elite 2x1GB DDR2-800 that as economic if they were quiet at 1000MHz with CL5 about 2.1V.
Perhaps someone thinks that given the opportunity I would be able to move to 4GB, but not having special needs are left on a 2x1GB kit.
The kit in question is as follows:
- Cellshock
- DDR2 1066
- 5-5-5-15
- 2GB (2x1GB)
- 2.3V
Here's a first test on the fly. I only set the four main timing and set the voltage to 2.3V as per specifications.
I see stability for the first do some longer than 3min with the gigabyte ds4, you should have no trouble getting another process with the alpha timings.
Obviously that was a screen test just started.
Say that after 2h 22m can say that it is stable!
With this result could prove a 400 * 8 cpu (with ram at 400 * 3). So as to increase the frequency. My e6420 has no problem to reach 3200MHz.
Ram say that these are really good, because cmq 1200Mhz for all of DDR2 in my opinion.
Even my non-D9 are 600 cas 5. You might try 1:2 and see what arrives CAS 5. Are you up to? You had crash etc. or can you still go up? The trfc is important, as we see a default set trial (row cycle time) if you are 5-5-5-15 should put it at 20 if I remember correctly.
With the same settings placed above testing on 1248MHz.
Then tried with RAM 1:2. Imposed the strap 1066? With a multiplier of 4.0 RAM can choose strap 800 or 1066.