Printable View
Is there any one that overclocked Sempron 3000 ? I have Sempron 3000+, 1 GB DDR 400 and GF 8600 GTS by the processor in my opinion is not fully used, the motherboard is Gigabyte K8 Triton. I'm interested in how I would get to the performance in games when it is overclocked, and then I add graphic card.
3000+ kind? Socket 754?
If this is, or later, than it has actually Athlon with less cache.
Just you now writing (S754). My work at 2.03 GHz (neakvih 3300+ now). The original was on 1.8. Thus does the default voltage and have no heat. Go to 2.2. On the good side and by 2.3. More than that, do not expect.
My thus set for approximately 20% faster more or less in all, from encoding MP3/DVD to play. Mostly, small difference. It is not heaven and earth, but a little.
Also in 720p content I see no problem in it, with that load of processors approximately 60-70% during the movie. Resolution of 1680x1050.
That the socket 754, are the default overclocked with cooler, even these are not hard to give me more info procedure because overclocking just to be working correctly.
I suggest that if you do not know voltages then dont try hands on that. First read some of the basics. My recommendation is to search on web for some instructions.
With ordinary default cooler BOX, you should not be better. my processors temp forever around 33-34 degrees (idle) and 45-50 (100% loaded), from time to me, and the cooler box revolves primarily on 40%. More accurately to 1150rpm.
Oh yes, between cooler and the processor is Arctic Silver past, now I do not know whether to play a major role. With the time that we no venilator housing, or not specifically winded.
The process is simple:
- Set down memory divider, or reduce the memory to work at something lower rhythmic (eg, from DDR400 to DDR333) so that they would not pressure over DDR400 when clocking (because its timing increases) rear-frequency FSB and the bus
- do not touch-HTT frequency if you do not think to go over 230 MHz with FSB. If you go through, to lower the HTT to 3x with 4x cool'n'quiet-opt in order to avoid automatic voltage regulation \ clock, it does not want when overclocking.
- voltage processors to boot if you go to extreme heights, and if you stress that the system is unstable.
It is difficult to explain in such a short text, but I tried to summarize.
For more information, write to google: "Athlon 64 overclocking." Is the same thing.
I overclocked Sempron 2800+ 1.6 GHz, Registry asus k8u-x, manual on 2.2, the temperature in NAD .. 35-45 ... max 50 ... It is alive and well one week. Speed is really obvious ... with 1.6 to 2.2 ... I did not put additional stress nor overly boot voltage ... It is on 1.5.
I think that you would with your own limits (somewhat strong from the mine specified) could also achieve good results.