Why is it not possible to install a RAID driver after the OS is installed?

I want to run a RAID 1 on two additional drives. I do not want raid on my Windows XP drive.

It does not appear possible to do this as the F6 key (which loads the driver from floppy) only is functional during the XP installation.

Can anyone help?

Quote:

---

Originally Posted by Neel23

I want to run a RAID 1 on two additional drives. I do not want raid on my Windows XP drive.

It does not appear possible to do this as the F6 key (which loads the driver from floppy) only is functional during the XP installation.

Can anyone help?

---

It's only necessary to use an F6 driver install in XP if you're planning on booting from a RAID driver, otherwise you can install the driver from within the OS.

Quote:

---

Originally Posted by Eldon

It's only necessary to use an F6 driver install in XP if you're planning on booting from a RAID driver, otherwise you can install the driver from within the OS.

---

That is good news but I don't see how to do this. Here is my setup:

GA EP45-DS3P Motherboard with onboard Intel Raid controller
XP Prof with SP3
C: Boot drive (non raid before and after) - sata
D: for Sata1
E: for Sata1
CDROM - ATA
DVD-RAM - ATA

regards.

Quote:

---

Originally Posted by Neel23

That is good news but I don't see how to do this. Here is my setup:

GA EP45-DS3P Motherboard with onboard Intel Raid controller
XP Prof with SP3
C: Boot drive (non raid before and after) - sata
D: for Sata1
E: for Sata1
CDROM - ATA
DVD-RAM - ATA

---

Have you tried the SATA RAID drivers from Gigabyte?

http://www.gigabyte.com.tw/Support/M...ProductID=2841

Quote:

---

Originally Posted by Neel23

That is good news but I don't see how to do this. Here is my setup:

GA EP45-DS3P Motherboard with onboard Intel Raid controller
XP Prof with SP3
C: Boot drive (non raid before and after) - sata
D: for Sata1
E: for Sata1
CDROM - ATA
DVD-RAM - ATA

regards,

---

The smaller download file, has the files for an F6 offering. You download it, double click and it unzips itself.

http://europe.giga-byte.com/FileList...ootdisk_32.exe

Copy the files to the floppy. The TXTSETUP file is how the OS figures out what is being offered. All the files go onto the floppy as is. There should be room.

07/29/2008 04:58a 11,607 iaahci.cat
07/20/2008 05:05p 9,063 iaAHCI.inf
07/29/2008 07:03p 11,215 iastor.cat
07/20/2008 05:05p 8,116 iaStor.inf
07/20/2008 05:44p 324,120 IaStor.sys
07/26/2006 11:09a 11,321 license.txt
07/20/2008 05:05p 4,884 TXTSETUP.OEM

I would do the repair install with only C: connected. That is to ensure nothing funny happens. Set the BIOS for RAID. Boot the Windows CD, and do the repair install, pressing F6 and offering the driver when needed. Windows may ask for the floppy twice, so don't be too quick removing it.

http://helpdesk.its.uiowa.edu/window...airinstall.htm

Once you're booted off C, you can download the larger 25MB file, as it would have the RAID Management console installation for the OS.

If you run into trouble when D/E are connected, you could try using the BIOS RAID setup screens to define D/E as an array at that point. Otherwise, if there isn't a problem booting with C,D,E all present, you can do the RAID setup with the Windows level Intel RAID Management software. Then, copy back the backed up files onto the new array.

Quote:

---

Originally Posted by Owen

The smaller download file, has the files for an F6 offering. You download it, double click and it unzips itself.

http://europe.giga-byte.com/FileList...ootdisk_32.exe

Copy the files to the floppy. The TXTSETUP file is how the OS figures out what is being offered. All the files go onto the floppy as is. There should be room.

07/29/2008 04:58a 11,607 iaahci.cat
07/20/2008 05:05p 9,063 iaAHCI.inf
07/29/2008 07:03p 11,215 iastor.cat
07/20/2008 05:05p 8,116 iaStor.inf
07/20/2008 05:44p 324,120 IaStor.sys
07/26/2006 11:09a 11,321 license.txt
07/20/2008 05:05p 4,884 TXTSETUP.OEM

I would do the repair install with only C: connected. That is to ensure nothing funny happens. Set the BIOS for RAID. Boot the Windows CD, and do the repair install, pressing F6 and offering the driver when needed. Windows may ask for the floppy twice, so don't be too quick removing it.

http://helpdesk.its.uiowa.edu/window...airinstall.htm

Once you're booted off C, you can download the larger 25MB file, as it would have the RAID Management console installation for the OS.

If you run into trouble when D/E are connected, you could try using the BIOS RAID setup screens to define D/E as an array at that point. Otherwise, if there isn't a problem booting with C,D,E all present, you can do the RAID setup with the Windows level Intel RAID Management software. Then, copy back the backed up files onto the new array.

---

Many thanks for your information. I have made the floppy and also copied the Matrix program to a flash disk.

Now I need to slipsteam my XP SP2 with SP3 before trying a repair.

thanks.