Printable View
When I enter the router IP address in the web browser, it will not display the router’s control panel and the web browser shows that page does not exist. There are frequent connection issues with my router and laptop is "connected but have limited connectivity". Actually there is no connection for the laptop as well as no internet access on their browsers or games. Is there any way getting into the router's settings
Currently the modems already have all the settings for Internet access, so it is not required to configure the router for this purpose. If you connect your modem on a pc and you are ready, disconnect it and connect it in another PC and configure it gives no signal of internet then you have to do is disable DHCP on the router, and connect an Ethernet cable one of the four entrances to the router and connect the signal where the modem out,
Make sure that you are using the proper IP address on the computer when you are connecting via web browser. If you seem that IP is proper, then reset the browser settings and try again for accessing the setup page. If it also doesn’t work, then I don’t have any other solution except resetting entire router.
Without knowing the proper settings and configuration of the network or router, it is quite difficult to help or find solution.
Do you have two wireless routers?
What is the model of DOS?
What do you want to do exactly?
Does the PC that is connected to internet via Wifi or Ethernet?
To connect to it, you have to connect directly to a PC via its Ethernet network card (not the WAN, but to any LAN port), disconnecting it from another router, i.e. as if you only had that, then you forget about the internet because I guess that just about access to your configuration. You get into the PC's browser and put the router address, this address (if you have not changed) will have factory default if you do not know it, just Download the router manual you'll find it easily in Internet and there you will have your address and passwords. To remove the current key you just have to reset it and it will be like when he bought
There is a tool called Router control which will help you to control the router. With router control check the online status and other characteristics of your router. The software also offers the option to disconnect from the router to build or have to, if this is supported by the router. Also included is a possibility for an update DynDNS.org account or sending an SMS when changing the IP address.
you should change the class type 192.168.3.1, however, I did not understand how they are connected to each other, I think the router is set as the max AP as a client, probably not what 's address, try to see what IP you assigns the router, at least we determine if the class is that you announced your installer.