Printable View
Hello friends, I’m having a DVD writer I need to flash it from BH10LS30 to a BH12LS30 on the spec sheets the difference between the BH10LS30 is that it had an extra 2MB buffer and the burning speed is 2x faster than the BH12LS30 and remaining feature is same. Does anyone know how to do this please guide me for the same. I will be thanking full to the person who ever help me for the same?
Hello, I don’t know much about it but I’m BH10LS30 and even BH10LS30_1.00 exe file and even code speed edit v 1.2.0.8 I had even loaded the latest version with MCSE and then checked it with RPC2 Auto Reset and saved it with a name BH10LS30_1.00-06_speedpatched.exe which can be use to flash my drive. But after rebooting it shows remaining changes 2 does anyone know how to check the firmware I’m using.
Hi, even I got the same problem after following all the procedure my system get restart and when I check Device Manager it shows Remaining changes: 4 actually, previously drivers had used the patch, I even have a second firmware in files.rpc1 for BH10LS30_1.00-09. But it doesn’t offer how to check RPC2 Auto Reset, is something is missing in it does anyone know?
Hello, I don’t know much about CD player but for DVD player you need to implement the blue-ray which is in the blue-ray player software and the counter Remaining changes: 2 should be the value for it in the device manager after flashing the drive and before you insert the next R1-DVD. Hope this part of information will help you a lot.
Hello, just check it again as counter cannot go to 4 as 4 include the vendor reset which is not possible in your case so to change it to the best value auto reset the firmware flashed and everything is done after that whenever you shutdown or restart your computer the counter value will automatically restarted. And then check the value if it is changing or no. if not so then flashes the firmware again with an appropriate firmware.
Hello, well in your case the restarting the computer is not enough as driver need a power cycle to reset the counter so restarting the computer is not enough as when the power-cycle the system then the driver will automatically reset the counter to Remaining changes: 2 as driver use to reset the region to R2 but the older version will change it to R1.hopw this is enough information to get rid from your problem if you can’t get the things then search it in YouTube to how to do that.