GA-MA770T-UD3 motherboard hangs and reboot while installing windows

I have at present obtained main troubles by means of this board I purchase 2 days ago. I contain a Athlon II x4 955 CPU, 2 GB memory in addition to GPU is ATI HD 8900. I have put in windows 7 two times now and the similar problems all time. The system strength reboot in the center of a setting up, hang when it’s fill or when it’s set up windows update previous to shutdown. I utilize Acronis for support and it create the backup however say mistake after a small number of minutes. It too remains 'windows explorer has a trouble and will shut. It appears there are a number of troubles move the information to and as of my hard drives. Also here is a graphics trouble; my windows achieve in favor of the GPU is 2.0 when prior to on my Asus board it be 7.00. 3D games collide after a minute or thus and I cannot run 3D score. I am slash my hair out to resolution these problem and am not certain where headed for go at the present as I contain efficient the BIOS. Can anyone propose what might be incorrect?

As per your problem what you have described here I hope i8 would be able to solve the problem you are getting from the motherboard. I think you are getting the trouble because of the improper updation of the bios. I want to know how did you have updated the BIOS for the updating to your Bios did you use any kind of application or software like QFlash or @BIOS and also I tell me which version you are using right now. Next and the most important what is your revision of motherboard revision.

I want to tell you to describe the problem with all the facts which you have tried or what are the trouble you getting with the things. I want to ask you the thing different from the above post because everybody have their own way of solving any issue will you please verify your CPU as there isn't an Athlon ii X4 955 did you signify a Phenom ii. Also what construct and form of hard drive are you annoying to utilize if it's an Energy Saving or else Green HDD's it might be source the trouble. Are you using in local IDE Mode or else AHCI on top of the SATA controller?

Thanks for answer and the greeting and my regret for not intimately following the strategy in 'Please interpret this previous to opening a fresh thread', I read it later than I posted. I initially updated by means of @Bios at what time I didn’t find resolute I attempt Qflash. I have try the BIOS as of Gigabyte downloads by means of the rev 1.4 which is my board. My CPU is properly a Phenom. I did contain a Maxtor EIDE drive associated and I include two Hitachi SATA drives and comprise now detached the Maxtor and am demanding on the way to set up on top of the SATA.I forget to utter that when I attempt my previous set up from the Windows 7 CD, system rebooted as well as the meaning was’ Windows unsuccessful to begin. A current hardware or software modify might subsist the cause’. Information: Windows unsuccessful to weight. A necessary file is absent or damage.