Printable View
Right now i am using windows xp service pack 3 and my system is not able to detect the USB drive.When i connect my USB drive to the system it flickers for 4 to 5 times then the system goes down.I am using sandisk Cruzer micro 1 GB pen drive.So i am not able to plug in my pen drive please reply with an answer quickly anyone.
Your USB driver is not working properly as there is some problem in the Disk management section of your computer.some times these happens due to the change in the settings of the drivers ,these problem can be easily solved by just following the below steps:
- First go to the my computer
- Right Click on My Computer
- Select manage
- Go to on storage
- Click on 'Disk management section'
- In the right pane, Right Click on device
- Select Letters and paths
- Select an alphabet
- Click on OK
Thats it!!!!!!
There can be a problem in your USB pen drive.it might happen that the pen drive you have is corrupted and it is not working properly.So first check your pen drive by plugging it into another computer if it does not work then go to your dealer for a replacement.if it is working properly then there must be a virus in your system which does not allow the USB to enter into the system.So check it and scan for viruses.
The USB port most of the time does not work due to the virus attack on it.Nowadays most of the viruses does not allow the USB devices to plug in. To resolve these problem you have to scan your system with an anti virus which can scan as well as heal the corrupted supporting files. There are a number of the anti viruses in the market which can be used for these issue such as AVG, Avast, Norton, Which are effective enough to solve your problem.
There are chances that your USB port is not functioning properly.So first check your USB port into the system or plug in your pen drive into other system if it works then there is a problem into the Port.Also there the Storage Disk Management section by right clicking on my computer then select manage then select storage then go to Disk management section and in the right pane,right click on device and select alphabets and paths and finally select an alphabet and you are done with it.!!!
I have tried the steps provided and it really worked for me.i just checked my USB pen drive in my friends system, it was working properly then i checked my USB port both where fine.Then i right clicked on my computer and make the changes provided above and they really worked for me.Anyone with these problem can try it ,it works and thank you for your support.
Use reginout regcleaner it will solve ur problem
The USB port many time do not work due to the corrupted software of the drive, the most recommended method for these is that you first install the original chipset drivers from the manufacturer company such as Intel/Gateway. Then you should delete the USB stuff in the Drive Manager, after that reboot and let the XP install new drivers. There are chances that BIOS setting for the USB is not properly done on your system such as allocating an IRQ that may help to a great extent.try all these if then too the problem exist in your system then contact the customer care assistance for help of the system company.