Printable View
Can you help me to setting up a network with Windows Server 2008, here several days that I am trying to configure this without success. Here is some info
ADSL Modem ===> PC: Windows 2008 server ===> router ===> PC1
^ ===> PC2
! ===> PC3
! ===> FP4
Printer
I would like to access the Internet, to the printer as well as to files on the server from any PC connected to the router.
You need to install the driver for your printer on the client (unless it is an ethernet printer to open the shared folder on the client you done.
This configuration uses the following parameters:
DSL Router
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Windows Server 2008
IP address of the DSL network card: 192.168.1.2
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
IP address of the LAN adapter: 192,168,168,249
Subnet Mask: 255.255.255.0
The default gateway of the DSL network adapter (external network) points to the IP address of the DSL router.
Work Station client
IP address of the LAN adapter: 192.168.168.10
Subnet Mask: 255.255.255.0,
Gateway: 192,168,168,249
In Windows Server 2008 for Itanium-Based Systems, Setupldr.efi is no longer present on the installation media. To install Windows Server 2008 from the Extensible Firmware Interface (EFI) shell, insert the installation media in the computer and choose Boot from EFI Shell in the boot menu. Then switch to the drive that contains the installation media, navigate to \efi\boot\, and run Bootia64.efi.