Msi p6n e6550 overclock

i have a msi p6n sli v2 motherboard with an e6550 processor.i want to overclock my configuration os can some one tell me how can i overclock this processor for good values and performance ?? also help me to overclock memory also. thank you .

Msi p6n e6550 overclock is fine P5K-E e6550 overclock is good option If you are new you can try application utility to over clock like cpu-z and gpu-z also for grphics card rivatuner is best. RivaTuner is a complete powerful tweaking environment, providing you everything you may need to tune NVIDIA GPU based display adapters. The widest driver-level Direct3D / OpenGL and system tuning options, flexible profiling system allowing to make custom settings on per-application basis, both driver-level and low-level hardware access modes, unique diagnostic and realtime hardware monitoring features and exclusive power user oriented tools like built-in registry editor and patch script engine make RivaTuner's feature set absolutely unmatched

I have some question
how to watch Core temperature? and not exceed 60 ° C for cores .the minimum CPU vCore is 1.1v how? we can not get more? what that can be desynchoniser the ram down? ie on a 400 fsb and ram a 333 because the cpu core is running a 266 and a 333 ram also what we can do to increase the vCore with set fsb under windows and can we put the vCore in bios is 1.2v and under windows on a 1.1v

It depends on the visible junction of core temp if tj = 100 does not exceed 85 °, 70-75 if you want to be more reasonable If tj = 85 ° does not exceed 65-70, the minimum CPU vCore depends on the motherboard but it is between 1 and 1.1v also you cannot increase the vCore with setfsb under windows

you want to oc or underclocker car car 1.1v you can not halt voltage as it is usually 1.35 max original if you want to climb too high in time I will suggest you set as AC voltage and test frequency to the max 1.35 with vdrop more in the bios I have a friend who has mounted his 1.5V in bios to get a real 1.39 heating and therefore consumes a serious idle you to see vdrop is especially annoying on a quad

Msi p6n e6550 overclock settingdisable Spread Spectrum settings arrange the PCIe at 100MHz, increase the CPU freq from 333MHz to 400MHz. That will put the CPU at 2.7GHz . The CPU DRAM freq ratio must be at 1:1 thats better as RAM overclocks along with the CPU. If RAM setting is at DDR2-800 (400MHz), then increased the CPU freq from 333 to 400MHz, you can further push it more to 3.0ghz but be careful ..