after overclocking Amd FX-6300 computer wont start
I recently overclocked my AMD FX-6300 CPU and not my pc will not turn on. All the leds are turning on along with the fans and graphics card but still nothing. The usb devices are also not working and there is no display on the screen. I have already tried unplugging and reconnecting everything but to no avail. I hope that I have not fried the mobo which is a MSI 760. Have 4GB of RAM, GTX 970 graphics card. Any help would be appreciated. Thanks
Re: after overclocking Amd FX-6300 computer wont start
Can you tell us whether there are any beeping sound when you are turning on your computer? What is the make and model of your Power Supply? You should try to perform a CMOS reset and see if that helps. Just take out the battery from the motherboard for 10 minutes and then try to reinsert it again. After that boot your PC and report back to us whether your PC is turning on or not. Since only the motherboard is not booting and all the fans and everything is working so it could be a problem with the mobo.
Re: after overclocking Amd FX-6300 computer wont start
Before removing the CMOS battery you will need to disconnect the power cable from the wall socket first. After that when the AD is disconnected then try to remove the CMOS battery and then hold the power button for few seconds so that the motherboard capacitors get drained out. Now wait for 20 minutes or so and then put the battery again and reconnect the power cord and then try to start your computer once again.
Re: after overclocking Amd FX-6300 computer wont start
You will have to disconnect cable going to the PSU before removing the battery to clear the CMOS properly. After some time install the battery and plug all the cable and then turn on the computer. I am assuming that your pc is facing problem posting with the overclock settings which is not getting resetted once you remove the CMOS battery. If still nothing seems to work then it can be assumed that the motherboard must have fried because of other hardwares turning on and just not posting.