Use Wii Controller as Mouse

I just brought a new Nintendo Wii ,, and i would like to make my controller use as mouse . can any one help me ?
how do I configure the Wii joystick so that it works as my mouse?

• First, you must install a special application called GlovePIE designed to help your computer use different kinds of input devices.
  
• Connect and install your Bluetooth dongle if you are using a desktop computer. Most laptops are already Bluetooth-enabled.
  
• Put the Wii remote in “discovery mode” by pressing both the “1” and “2” buttons. You can also press the “discovery mode” button underneath the battery covering. The LED lights should start flashing when you have done this correctly.
  
• Open the Bluetooth settings on your PC and click “Bluetooth Setup.” Click “Next,” and then click “Human Interface Device.” (You can also click “Create new Bluetooth Connection” for some interfaces.)
  
• Your computer should now find your Wii remote.
  
• You can set up multiple Wii remotes by following the same steps.

Software you will need:

• Kensington WIDCOMM Bluetooth stack
• Bluetooth adapter drivers
• GlovePIE by Carl Kenner

In order to use your Wiimote as a mouse on your PC, you will have to connect it to the PC via Bluetooth, then run a script in the GlovePIE application that will translate the Wiimote actions to mouse actions. For this tutorial I will be using the Anycom 200 Bluetooth adapter which I got for $7.28 shipped from Buy.com using Google Checkout. NOTE: Microsoft’s Bluetooth stack will not.

Connect Wiimote to PC:

1. Download, extract, and install Kensington WIDCOMM Bluetooth stack. (Run Setup.exe)
NOTE: DO NOT plug in adapter during installation when asked
2. Plug in adapter
3. When asked to install drivers, insert CD that came with adapter and continue installation
4. Open My Bluetooth Places to start the Initial Bluetooth Configuration Wizard
5. Press the Next button until you ge to the Bluetooth Device Selection screen
6. Press the red SYNC button under the battery cover on the Wiimote (LEDs on the Wiimote should blink)
7. Press Search Again in the wizard
8. Nintendo RVL-CNT-01 should appear
9. Select it and press Next
10. Skip Pairing
11. Make sure the LEDs on the Wiimote are blinking (press the red SYNC button again if you have to)
12. Press Refresh in the wizard if necessary
13. Check the box next to Nintendo RVL-CNT-01 and press Next
14. Press Skip the Next
15. Reopen My Bluetooth Places
16. Select Bluetooth Setup Wizard from left panel
17. Select I want to find a specific Bluetooth device… and press Next
18. Select Nintendo RVL-CNT-01 and press Next, if it is not there repeat steps 6-8
19. Repeat steps 10-13
20. The icon shown for Nintendo RVL-CNT-01 when View devices in range is selected should now have a green connection symbol on it, if not repeat until it does

Use Wiimote as mouse:

1. Download and extract GlovePIE
2. Run GlovePIE.exe
3. Select File->Open
4. Open file named TestWiimote.PIE
5. Press Run
NOTE: if numbers do not change, you Wiimote is not connected to your PC properly
6. Press Stop
7. Turn your Wii on and make sure the sensor bar is over or under your monitor
8. Select File->New
9. Cut and Paste the following script into the window and press Run:

Code:

---

//Mouse Control Script using IR
//by vkapadia with much assistance from inio
//vkapadia@vkapadia.com
//
//Calibration:
//To calibrate, run this program and put the Wiimote on a flat surface face-up.
//Then read the values in the debug line (next to the run button).
//Change these values until the debug line reads approx. all zeros.
var.xtrim = 6
var.ytrim = -31
var.ztrim = 6
//
//Options:
var.deadzone = 5 //distance in pixels that you have to move the wiimote in
//order for it to register movement. Creates a “dead zone” around the pointer
//to make it easier to click. Higher = smoother but less accurate.
var.KITTspeed = 100 ms //delay speed for flashing LEDs. higher = slower
var.rumble = false //makes the wiimote rumble if you hit the edge of the screen
//more options to be added later
//Controls:
//Point Wiimote = Move Mouse
//D-Pad = Arrow Keys
//B-Button = Left Click
//Home = Middle Click
//A-Button = Right Click
//Plus and Minus = Control Volume
//One = Unmapped
//Two = Unmapped
//
//If the pointer hits the edge of the screen, the Wiimote will rumble a bit.
//
//The LEDs attempt to emulate KITT’s grill from Knight Rider
//***Do not edit anything below this line unless you know what you are doing.***
//Set the D-Pad to function as the Arrow Keys
if wiimote.Up
Up = true
else
Up = false
endif
if wiimote.Down
Down = true
else
Down = false
endif
if wiimote.Left
Left = true
else
Left = false
endif
if wiimote.Right
Right = true
else
Right = false
endif
//Mouse Buttons
Mouse.RightButton = Wiimote.A
Mouse.LeftButton = Wiimote.B
Mouse.MiddleButton = Wiimote.Home
//Plus and Minus handle Volume
if wiimote.plus then
volumeup = true
wait 60 ms
volumeup = false
endif
if wiimote.minus then
volumedown = true
wait 60 ms
volumedown = false
endif
//wiimote.One
//wiimote.Two
//LEDs look somewhat like KITT’s grill from Knight Rider
if 0 = 0 then
if var.kitt = 0 then
wiimote.Leds = 1
endif
if var.kitt = 1 then
wiimote.Leds = 3
endif
if var.kitt = 2 then
wiimote.Leds = 6
endif
if var.kitt = 3 then
wiimote.Leds = 12
endif
if var.kitt = 4 then
wiimote.Leds = 8
endif
if var.kitt = 5 then
wiimote.Leds = 12
endif
if var.kitt = 6 then
wiimote.Leds = 6
endif
if var.kitt = 7 then
wiimote.Leds = 3
endif
wait var.KITTspeed
var.kitt = (var.kitt + 1) % 8
endif
//If the mouse reaches the end, rumble for 200 milliseconds
if var.rumble and (mouse.x = 0 or mouse.x = 1 or mouse.y = 0 or mouse.y = 1) then
if var.rmbl = false
wiimote.Rumble = 1
wait 200 ms
wiimote.Rumble = 0
endif
var.rmbl = true
else
var.rmbl = false
endif
var.accx = wiimote.RawForceX + var.xtrim
var.accy = wiimote.RawForceY + var.ytrim
var.accz = wiimote.RawForceZ + var.ztrim
if wiimote.dot1vis and wiimote.dot2vis then
if var.accy > -7 then
var.orientation = 0
elseif var.accy > -45 then
if var.accx < 0 then
var.orientation = 3
else
var.orientation = 1
endif
else
var.orientation = 2
endif
if var.leftpoint = 0 then
if var.orientation = 0 then
if wiimote.dot1x wiimote.dot2y then
var.leftpoint = 1
else
var.leftpoint = 2
endif
endif
if var.orientation = 2 then
if wiimote.dot1x > wiimote.dot2x then
var.leftpoint = 1
else
var.leftpoint = 2
endif
endif
if var.orientation = 3 then
if wiimote.dot1y < wiimote.dot2y then
var.leftpoint = 1
else
var.leftpoint = 2
endif
endif
endif
if var.leftpoint = 1 then
var.fix1x = wiimote.dot1x
var.fix1y = wiimote.dot1y
var.fix2x = wiimote.dot2x
var.fix2y = wiimote.dot2y
else
var.fix1x = wiimote.dot2x
var.fix1y = wiimote.dot2y
var.fix2x = wiimote.dot1x
var.fix2y = wiimote.dot1y
endif
var.dx = var.fix2x - var.fix1x
var.dy = var.fix2y - var.fix1y
var.cx = (var.fix1x+var.fix2x)/1024.0 - 1
var.cy = (var.fix1y+var.fix2y)/1024.0 - .75
var.d = sqrt(var.dx*var.dx+var.dy*var.dy)
var.dx = var.dx / var.d
var.dy = var.dy / var.d
var.ox = -var.dy*var.cy-var.dx*var.cx;
var.oy = -var.dx*var.cy+var.dy*var.cx;
var.ax = (var.ox * screen.desktopwidth) + (screen.desktopwidth / 2)
var.ay = (-var.oy * screen.desktopwidth) + (screen.desktopheight / 2)
var.dx = var.ax - mouse.cursorposx
var.dy = var.ay - mouse.cursorposy
var.d = sqrt((var.dx*var.dx)+(var.dy*var.dy))
var.a = 180 / (200 + var.d * var.d * var.d * .001)
if var.d <= var.deadzone then var.a = 1
debug = var.d + ” ” + var.a
var.finalx = mouse.cursorposx * var.a + var.ax * (1 - var.a)
var.finaly = mouse.cursorposy * var.a + var.ay * (1 - var.a)
mouse.cursorposx = var.finalx
mouse.cursorposy = var.finaly
else
var.leftpoint = 0
endif
//debug = var.accx + ” ” + var.accy + ” ” + var.accz

---

Script provided by vkapadia.

You should now be able to successfully point and click on your PC just as you would with a mouse.

You will have to repeat steps 15-20 of Connect Wiimote to PC above, each time you want to reconnect to the Wiimote.

The script provided requires a sensor bar. You can create your own or modify the one provided with the Wii to be powered from batteries, eliminating the need for the Wii to be powered on. Also, you can use 2 lit candles placed near the bottom of your monitor but I don’t recommend this.

See this video for more help : http://www.youtube.com/watch?v=bpVkq...eature=related

I'm using a program called DarWiinRemote for my mac and I tried setting everything up as a joytick for battlefield 1942. The only problem is that when I boot up the game, everything works except for motion sensing, even though I am using a sensor bar and it works for mouse mode when I'm not playing any games.
Any ideas on how to fix this?