HP ZD7000 stops at initial boot screen after Repair AC Jack

[Ooopinder]

Last one year I buy this HP ZD7000 laptop and last week, initial problem of this laptop had a broken AC Jack. Then I repair this AC jack with the new one. Now I got a new problem on this laptop and this is the laptop does not pass the initial boot screen. When I try to boot the system, then it show the HP splash page and then it reboot laptop. Not even any beep arrives on this laptop. I need perfect solution to solve this problem.

[switchblade327]

You need to at least try pulling out the hard drive. This is necessary for the data recovery purpose. Then for getting data files from the HDD during an external adapter. If this laptop won’t turn with the AC jack then you need to check that the turns on laptop with battery. if it start with no problem, then it will be helps to solve the motherboard problem on this laptop. Then replace this AC jack with the other one. It solves the problem of your laptop system.

[Algonkin]

There is an perfect solution over this problem. You need to try to removing the memory storage devices on this laptop. This memory storage device is as rams and hard drive. You need to use the manual of the laptop and then unplug this RAM and hard disk in proper way. Then try to correctly re-seat them into proper position. This will be help to solve this complicated problem of the laptop. This work most time and laptop start regularly.

[Kickapoo]

You need to used the "F8" key to get to the Advanced Boot Options menu. In this menu just, you need to use the Safe Mode with Command Prompt options. This will be work with scroll a list of drivers that are installed. Then everything stops with the last loaded driver present on this system crcdisk.sys file. The other option of this menu is that Last Known Good Configuration for doing this problem solving task. Then use this and solve the problem.

[Odalis]

The other way is to be just boot the laptop using Norton Ghost 10.0 software. This is the perfect software that help to copy off various documents & picture files present on the laptop to an USB drive. The Norton ghost software is to be able to detect the problem present on the laptop and then as per the problem it works something to solve this problem. You need to use this software for this troubleshooting purpose.

[Erie]

There is a "restore option" in the system bootable disk of the laptop. Specially the windows based disk will be help to takes laptop back to a previous working point. This is the best solution that will be restoring the setting of the OS if something misuse happen on it. Then just try this solution and it will be help to solve the problem of the laptop. This restore is the best way that will be help to just restore setting and solve the problem.