Photosmart C6180 All-in-one printer turning on and off

[Maddy07]

We own a Photosmart C6180 All-in-one printer which comes alone from being powered up ( just plug in the power supply ) and is impossible to extinguish . Without any error messages that can appear to the screen. The exclamation point flashes red but no information on the screen except the dash that never stops to shop around. I put the paper , change the cartridge , open and close the cover print DVD / CD and the print itself. I also check the proper functioning of the print cartridge . Nothing to do this in does not work. The printer going to turn off and on. Can anybody know what is the issue with my printer. Please help.

[Bon-Z]

Check the steps to resolve the issue.
1. Turn off the all -in -one and unplug the power cord.
2. Lift the automatic document feeder cover.
3. Lightly dampen a clean lint- free cloth with Distilled water and squeeze excess liquid from the "any cloth .
4. Use the damp cloth to wipe "any residue off the rollers.
5. Verify That the paper feed rollers are clean and rotate easily.
6. Close the cover of the automatic document feeder.
7. Plug in the power cord and turn on the all - in -one .

[Gonzo]

You need to disconnect your HP All - in- One from your computer. Do not connect the HP All -in -One to your computer after Until You Have reinstalled the software Press the button to turn off the HP All - in - One .On the Windows taskbar , click Start , Programs gold All Programs , HP , And Then click the HP Photosmart printer name . Click Uninstall .Follow the onscreen instructions .If you are Asked whether you would like to remove shared files , click No. . Other Programs that use queues thesis Might not work if the files are Properly deleted.

[Pugsly]

If you want to set your camera photosmart in USB drive , it is possible to do so by following these steps :
- Turn off the camera .
- Unplug the USB cable.
- Turn on the camera.
- Press the OK button .
- Go Configure .
- In USB Configuration Selected USB drive and non- Digital Camera.
- Turn off the unit, reconnect the cable and switch on again.
- Appears when a drive on your workstation where you can recover your photos.

[Regina]

May be your connection do not share its IRQ with another device ( IRQ Holder for PCI Steering is not considered another device). When the USB sharing IRQ with the sound cards , video, network and modem, problems can occur . Free as many IRQs as possible in the BIOS. Start with COM1 or COM2 , if there is no external serial device , mouse or digital camera connected to the computer. Once the devices disabled in the BIOS , go to Windows Safe Mode and delete the devices from Device Manager.

[Simond]

You can select the second option the printer is physically connected to the Switch (And thus the network) . It can be moved in any Building location From the moment a network jack is present near the device.For the second step, we install it a Print Server on the server itself. We select the first option. At this point, the printer will be detected on the network. There are two ways to do so. I prefer the first is much simpler. As we enter the second is the MAC address or IP address or the name of the printer recognized in the Field.