My first experience overclocking and I have a lot of questions and discoveries, I went through quite a few options for overclocking, but did not reach the desired result (4.4 GHz). My CPU is, as I understand from various articles that can do more, but I get the most 4.15GHz. Anybody will tell you that in the settings wrong? Or more to the die can not?
Stable version (limit):
Code:
CPU Ratio Setting = 23; BCLK = 180; DRAM 1804MHz
All other options do not work.
UCLK = Auto; QPI Link Data Rate = Auto
CPU Turbo Power Limit: Disabled
C1E Support: Disabled
Hardware Prefetcher: Enabled
Adjacent Cache Line Prefetch: Enabled
CPU TM Function: Disabled
HT Technology: Enabled
SpeedStep Tech: Disabled
C-State Tech: Disabled
CPU Spread Spectrum: Disabled
In the process there was excessive heat on the CPU and north bridge, put a manual voltage and heat stabilized
CPU Voltage = 1.36250
CPU PLL Voltage = 1.80200
QPI / DRAM Core Voltage = 1.39375
DRAM Bus Voltage = 1.60325
I have the same mobo and cpu
Bookmarks