MSI Afterburner drops back voltage to 1.164

[Rawana]

Currently I am utilizing MSI afterburner 1.6.1 for the purpose of overclock MSI R5830 in my computer. I have somewhat managed to dig up the card steady by the use of these settings: Voltage at 1.220v, Clock at 950 MHz, memory at 1205 MHz. Whilst I am utilizing whichever 3D app, similar to a game, the voltage will indiscriminately go backside down to 1.164v causing the PC to crash. I couldn’t able to find out what is causing this crash. Can anyone help me?

[GracieSingh]

It seems to me that there is somewhat by way of the suppliers shipping dissimilar voltage controller chips for this video card and that may perhaps reason the issue like the dissimilar chips necessitate dissimilar voltages. It is just my thinking. However the MSI is a excellence corporation while thus I would set further of the guilt on the chipset corporation (AMD) for trading doubtful chips to them and not blame MSI seeing that they have no manner of deliberate until the card is formed that the chip is flakey. I think that you should need MSI assist. Ask them and they will surely going to help you.

[Sydney_7]

I attempt to push alt+ctrl+shift+v whilst kombustor is functioning. It does put in settings string inside .cfg file inside Profile directory, except it doesn’t assist to resolve 1.164 issues. Furthermore i disable monitoring voltage preference as well as control voltage preferences - it won’t help out. As opening 3D app voltage adding toward 1.164 value. Despite which value is put - underneath 1.164 or upper, - in excess of several time it will be again 1.164 and 3D application just crashed and later the computer itself. This issue resolves only when not attempting to overclock greater than 770-780 Mhz. Following overclocking core clocks toward 800 Mhz or over problem comes into view over again still if voltage control or voltage monitoring disabled.

[Makayla-alex]

I think that you are using the 2 overclocking utility. If this is the case then it will really gonna blow up the GPU. The cause I told you that by the use of further than single tools at same time, one application may perhaps take precedence in excess of the settings of the additional, therefore exposing the entire point of attempting to overclock useless. That is why you must attempt and fix toward one, to ensure that all settings are applied properly and they are not modified or avoided to transform from an additional tool.

[Lawford]

When I looked into the clocks I have realized that they are normal that is an excellent obsession. You may perhaps be considering the voltage drop back down for the reason that it is reverting toward the idle voltage additionally. By way of msi afterburner, set off into the program directory for it, and correct the .cfg file and add the following line toward the end of the file
EnableUnofficialOverclocking = 1
Now this must permit you to modify voltages/clocks like you desire.

[Laramie]

Until now the most excellent overclocking tool for me is ATITT. It provides the mainly and finest options of every part of (counting setting the voltages, elevated overclock values and dissimilar game profiles). The previous one is extremely significant, because for instance i can make use of a profile in favor of a game that does not necessitate a lot of control and set a lesser clock and an inferior fan quantity, consequently quiet and power proficient, whilst when i play Crysis for instance. I can set an utmost vcore, overclock and an upper fan - noisier, except i can overclock well again.