SetFSB - Clock Generator List Compilation

[Tamila]

I necessitate some help in find out the clock Generator List Compilation in setfsb. I had told this one as the best tool for over clocking. I had not used this before so need help of you to first time use the tool and in addition work with the list compilation. Where be able to I get the list of all series of board which are supported by this.

[Abbie]

When you have opened the program, you necessitate setting your clock generator pll. In the dir where you have extracted setfsb , there is situated a txt file called "setfsb.txt" In that txt is there a register of over clock generators to utilize, you be able to in addition look at your motherboard. In this case you utilize an Asus p5k pre board and you necessitate utilizing the specified clock generator. You have to select your clock generator in the drop down menu. Then hit it off to get fsb.

[Brooks]

Once you are completed with the setup. You be able to observe our present fsb/memory frequency/pci-e and pci. You be able to observe there is 4 buttons with arrows fronts, they two on the left from the setfsb switch is to adjust: pci-e/pci speed and the two in excess of the [auto] button is to regulate our fsb. At present you are prepared to start over clocking. In this case you booted into windows at 390fsb (e6600 at 266 default) Raise the fsb with the switch in excess of the auto switch, in this case where you desire to raise our fsb you necessitate to utilize this switch after adjusting your fsb to the required you have to hit it off to set fsb.

[Deepest BLUE]

At present you be able to observe the fsb bar with the indicator moves back and permit you to adjust your fsb additional. You have to make a note of its not suggested to create big jumps in fsb at one time, it is superior to raise with ex: 10fsb at a time and when your finishing on max, then raise the fsb rate by 2-5. You can also get the illustration where you have raised your fsb from 410 to 420.

[desilva]

To SetFSB 2.3.143.106 is a CPU Benchmark manufactured goods from www13.plala.or.jp, get 5 Stars SoftSea Rating, SetFSB is software that gives you be in command of and diagnosis of your CPU. The clock register generator is able to be getting the official site of setfsb. There is extended register of the similar relevant to most of the motherboards. You can try to search it on goggle.

[Common]

If you are using win7, you be able to agenda the apparatus to run setfsb when you log in, as well as when you unlock subsequent to sleep. You have to eliminate the setfsb shortcut from auto run and go into task scheduler. Pick generate task, and type in a name and descry, tick "work with highest privileges", go to triggers, hit it off new, and pick "at logon", hit it off ok. Pick innovative again, and select "on workstation unlock". For this you have to go to the actions, and then hit it off "new" and type in the path to setfsb, under arguments, type in -s145 -b1. Under "Start in" type in the pathway to the database setfsb resides in, - click ok. Under Conditions, untick "stop if the system is working on battery power", and hit it off ok. At present, setfsb determine to be working no matter what you do.

[Abhibhava]

The Phase Locked Loop (PLL) is a chip on the motherboard that engenders the frequencies for a variety of apparatus. On numerous of today’s motherboards, there are at smallest amount four reference frequencies: FSB, memory, PCI Express bus, and PCI bus; the PLL engenders these frequencies. In put into practice, on the preponderance of boards, the FSB and memory frequencies are linked (with a ratio that is able to be selected in the BIOS setup program); at the same time as the PCI Express and PCI frequencies are predetermined (at 100 MHz and 33 MHz respectively). Convinced motherboards, similar to the one used in the screenshot, in addition connect the PCI Express and PCI bus speeds.