hi,
I have a question about the Zalman Multi Fan Speed Controller ZM-Plus MFC1 black. In the description is that he has 6 Active Rpm. But below it is the only 2 active and 4 inactive?Any recommendations and suggestions are appreciated.
hi,
I have a question about the Zalman Multi Fan Speed Controller ZM-Plus MFC1 black. In the description is that he has 6 Active Rpm. But below it is the only 2 active and 4 inactive?Any recommendations and suggestions are appreciated.
It regulates the fan speed on the operating principle, the cooling fan.The fan control can be PWM-controlled fans,If you like the advantage of better controllability of PWM fans in the lower speed range is very important to take you from the outset slowly rotating fans. These are then also by the corresponding voltage range of speeds well controlled.
A normal 2000rpm fan will send Voltage very bad, or because the required voltage is below its initial voltage is maybe not even at 300 rpm can be adjusted. Will you have a 800, so no problems there.
the fan control also sufficiently constant.That does not always quite as good. It can sometimes be, you ask, for example 875 rpm, and the corresponding fan spins then 880 or even 890 rpm might as well of course, the speed is somewhere under the settings are.The new fan controller from Zalman is characterized by a high-quality and top-current design. He convinces you through high-quality finish with a fine aluminum cladding. The ZM-MFC1 Plus is a 6-Channel Multi Fan Controller and allows either after cooling or after volume regulate. The aluminum front panel offers maximum aesthetics.
Bookmarks