Memory Timings set according to Overclocking?

[Woodrow]

Hello,
my system:

Board: P5Q Deluxe
CPU: Q9450
Memory: 4x 1GB PC2-6400 (OCZ2T800C31G)


Now I have the Q9450 at 3.2 GHz at FSB overclocked, also running as far as stable. With the ram settings to auto run the memory at 5-5-5-15 at 800Mhz clock set (1:1).
When I transfer the settings from Auto to the specified settings of the memory settings run manually it is simply not stable.

by OCZ are:
3-4-4-15 at 2.3V

where is the error? or is it no longer possible with the memory timings to drive?

[.:MUNDITO:.]

hi,
you could change the memory controller with voltage.

[Woodrow]

hi,
because the bios by default reads values from the SPD profile,my ADATA's running 100% stable at 4-4-4-11 2T @ 800 mhz / 2.0 v

[Viceman]

Hi,

Please try the following settings: RAM 2,2 V, NB / MCH 1.4 V, Ai Clock Twister Lighter / Light, CPU and PCIE Spread Spectrum Disabled, 4-4-4-15 timings and Row Refresh Cycle Time is 58 If the current BIOS version?