Opinion Pentium E2180 overclocking

[Solitario]

Hello I just get a configuration yesterday with a Pentium E2180 and I am already a bit but I overclocking rating.

Here is my configuration

Intel Pentium E2180 @2,00 Ghz oc a 2700Mhz (10x270)
Motherboard Gigabyte GA-G33M-DS2R
Sapphire Radeon HD 3870 512Mb

I wonder if they can exceed the threshold of 2.8 GHz and how do I know that a grant from FSB.

Help me

[Solitario]

I try to overclock a little pile I'm at 2.8 Ghz with voltages

1.325 volts for the CPU
FSB 280x10
ratio 10.00
932Mhz memory frequency in 1.8-volt
AGP and PCIE frequency are black (I overclock for now with Easytune5 pro and there is nothing on the rectangle AGP and PCIE ( because they blocked better and time) and 33MHz for the PCI slot.

I wonder if for the moment nothing bizzare is that I said, if the voltage and frequency are correct.

In my Idle processor and a 19 ° and when it's super pie 1M and it has large maximum 30 °.

[.:MUNDITO:.]

Use OCCT
His work will make your processor for 1h, and you to check if there are calculation errors. super PI I have a E5200 yesterday i am at 3Ghz instead of 2.5, and I did some 19s and Super PI. plus By careful against your processor it is engraved in 65nm, it should more heated. it Remains cautious and seeks advice.

[SUpER CoP]

280 MHz FSB this is nothing, motherboards are expected to operate with FSB of 333 MHz to the absolute minimum. So you can still mount - try to mount - without risk to the components.
This is not surprising that your CPU is at 3.33 GHz. If it starts setting up, you increase by step the CPU voltage (vCore). Once you have identified the maximum you with a valid OCCT, a memtest and you enter the settings in the BIOS.