"Overclocking Database" AMD K10 Phenom2/Athlon!

[Aiden]

Hello Friends,

I made this thread to overclock Database K10 in 45nm designs Phenom2 X4 socket AM2 +, Phenom2 X4/X3 AM3, K10 Athlon X4/X3/X2 AM3, there is also a page dedicated to the old K10 CPU Phenom X4/X3 - Athlon series 7000/6000 to 65nm.

We will consider lot about what program to use and how much was during the test to determine how actually CPU analyzed Solid Rock.
Since it was impractical to impose 6 / 12 hours of stress tests and in practice not arrived at a decision that goes well for everyone, I have decided as follows:

Mandatory:
2 hours (minimum) program Prime95 (option blend)
A full session of the S & M

"Overclocking Overclock database MAX" Phenom2 X4 X3 Socket AM2 + / AM3
will be devoted to the CPU with the highest possible clock frequency or CPU that have not passed the test of the thread on the "Rock Solid".

[Reginald]

Mandatory:
2 hours (minimum) program Prime95 (option bland)
A full session of the S & M

there is a mistake, an option "bland."

I have a test for Memory controller and for RAM, quadruple type super by 32M. So we just want to do so.

[Aiden]

there is a mistake, an option "bland."

I have a test for Memory controller and for RAM, quadruple type super by 32M. So we just want to do so.

Note that with Athlon x2, 5 minutes of S & M = at least 1 hour Orthos priority 9 ...

It would be seen if the same thing happens with Phenom. If so, given that Prime = Orthos, I have done both test and enter something in addition to S & M.

Another thing is fine the memory controller, but does not test the RAM beyond the scope of th?
Given the architecture of the Phenom, there's no way to isolate the stability of core separately to that of the MC?