hey, i want someone with the same MB to tell me their own arrangements! + Q9450 + CM880Pro + Memory DDR3 Corsair 1600DHX 2 X 1Gb 1768Mhz 8-7-7-20 1T
I am OK at 3,500 with cpu 1.28100V, Pll 1.56V, Nb1.45V, sb1.250V, fsb.134V with FSB above 3,500 stutter! They are arrangements try now but there are many volt??
CPU Features 3.560Ghz Fsb 1780Mhz 1 / 2 Cpu / Fsb
Ai Overclock Tuner Manual
CPU Ratio Setting: 8
FSB Strap to North Bridge: 333
FSB Frequency: 445
PCIE Frequency: 110
DRAM Frequency DDR: 1780
DRAM Command Rate: 1T
DRAM Timings
DRAM Timing Control: Manual
CAS # Latency: 8
RAS # to CAS # Delay: 7
RAS # PRE Time: 7
RAS # ACT Time: 20
RAS # to RAS # Delay: 4
REF Cycle Time: 60
WRITE Recovery Time: 9
READ to PRE Time: 6
READ to WRITE Delay (S / D): 9
WRITE to READ Delay (S): 5
WRITE to READ Delay (D): 6
READ to READ Delay (S): 4
READ to READ Delay (D): 7
WRITE to WRITE Delay (S): 4
WRITE to WRITE Delay (D): 7
DRAM Dynamic Read Control: Disable
DDRAM Dynamic Write Control: disable
Ai Clock Twister: strong
Ai clock skew for channel A: auto
Ai clock skew for channel B: auto
Ai Transaction Booster: enabled 2
Voltage Settings
CPU Voltage: 1.28700V
CPU PLL Voltage: 1.56V
NB Voltage: 1.47V
DRAM Voltage: 1.88V
FSB Termination Voltage: 1.34V
SB Voltage: 1.125V
Load-Line Calibration: enable
CPU GTL Reference: 0.63
NB GTL Voltage Reference: 0.67
but in the Dutch: auto
Reply With Quote
Bookmarks