opening mmc and trying to use servers manager gives error

[maay.fell]

olá pessoal quando eu abro o mmc e tento usar o gerenciamento de sevidores ele me da um erro que é o erro listado abaixo

greetings people when i open the mmc and try to use the servers manager it gives me an error that is the error listed below:

Description:
Stopped working

Problem Signature:
Problem Event Name: CLR20r3
Problem Signature 01: mmc.exe
Problem Signature 02: 6.0.6002.18005
Problem Signature 03: 49e01c0a
Problem Signature 04: Microsoft.Windows.ServerManager
Problem Signature 05: 6.0.0.0
Problem Signature 06: 49e037dd
Problem Signature 07: 1f31
Problem Signature 08: 0
Problem Signature 09: System.NullReferenceException
OS Version: 6.0.6002.2.2.0.256.1
Locale ID: 1046

Leia nossa declaração de privacidade:
http://go.microsoft.com/fwlink/?link...3&clcid=0x0416

Descrição:
Stopped working

Assinatura do problema:
Nome do Evento de Problema: CLR20r3
Assinatura do Problema 01: mmc.exe
Assinatura do Problema 02: 6.0.6002.18005
Assinatura do Problema 03: 49e01c0a
Assinatura do Problema 04: Microsoft.Windows.ServerManager
Assinatura do Problema 05: 6.0.0.0
Assinatura do Problema 06: 49e037dd
Assinatura do Problema 07: 1f31
Assinatura do Problema 08: 0
Assinatura do Problema 09: System.NullReferenceException
Versão do sistema operacional: 6.0.6002.2.2.0.256.1
Identificação da Localidade: 1046

Leia nossa declaração de privacidade:
http://go.microsoft.com/fwlink/?link...3&clcid=0x0416

se alguém puder me dar uma mãozinha sobre esse erro eu ficaria muito grata preciso acessar o gerenciador de servidores para fazer o DHCP e o active directory

if someone can give me a hand 'bout this error i would be very grateful i need to acess the server manager to activate the DHCP and the active directory

antes de qualquer coisa obrigada pela ajuda

before everything thaks for de help

danke danke

xoxo*

[EINSTEIN_007]

To configure the DHCP scope, you must log on as administrator. Configuring the DHCP scope supplies the DHCP client with the range of IP addresses from which the server draws from and a subnet mask to be assigned to clients.

From the Network Administration group, start DHCP Manager.

The DHCP Manager window appears.
Under DHCP Servers, select *Local Machine*

Local Machine indicates that you are configuring the local DHCP server, and not a remote DHCP server.
From the Scope menu, choose Create.

The Create Scope dialog box appears.
Complete the scope configuration.

The DHCP server cannot be a DHCP client. It must have a static IP address, subnet mask, and default gateway address. You also have the option of assigning an exclusion range or specific excluded addresses as well as lease duration and a name.
Choose OK when done.
Choose Yes to activate the scope.

The DHCP Manager window appears with the new scope added. Notice the yellow light bulb next to the IP address. This indicates an active scope.
Close the DHCP Manager.

More information here: http://support.microsoft.com/kb/139904

[maay.fell]

hi danke for the help

i'm using the administrator to open the mmc but i can't open this unfortunatelly it totally crash do you know what this error that i've put in the message above means ??

thank you for the tip

[JAMES_911]

1. Click Start, right click the Command Prompt and click Run as administrator. Click Continue if being prompted.

2. In the Command Prompt, type the following command and press Enter:

Dcomcnfg.exe

Click to expand Component Services and then expand Computers.

Right click "My Computer" and click Properties.

3. Click on the Default Properties tab.

In the "Default Authentication Level" drop down list, if it is set to "None", change it to "Connect".

In the "Default Impersonation Level" drop down list, select "Identify".

Click Apply and click OK.

[maay.fell]

Somebodyy help me please! thanks

[nitesh mehta]

Somebodyy help me please! thanks

Did you try the above solution given by JAMES_911? Apart from all that solutions, have you tried restore some missing services like Logical Disk Manager and Logical Disk Manager Administrative Service. If you want to restore it then try to download diskmgmt.reg file available at the bottom of this page and save it to Desktop. Then, right-click the file and choose Merge. Click Yes to confirm. Restart Windows and see if you're able to launch Disk Managemt MMC successfully.