Results 1 to 4 of 4

Thread: Kingston HyperX SSD not recognized in my computer

  1. #1
    Join Date
    Oct 2014
    Posts
    11

    Kingston HyperX SSD not recognized in my computer

    I have just rebuilt my computer with a new processor and motherboard but if I am going to install Windows then my Kingston HyperX SSD is not getting recognized by my computer. When I boot in Windows then it is not recognized and going into BIOS nothing is shown as connected into the Sata port. At the moment I am running Windows from my hard drive which is also connected alongside the unrecognized SSD. I am using Asrock z97 motherboard by the way. If anyone could help me out it would be appreciated. Thanks

  2. #2
    Join Date
    May 2008
    Posts
    1,822

    Re: Kingston HyperX SSD not recognized in my computer

    Well, have you tried swapping to another Sata ports? Also you should try to triple check the cables for both the Sata and Power cable. Can you test on another computer to see if the SSD is getting recognized? If it is not getting detecte then it is most likely a bad SSD but if not then most probably there is some issue with the motherboard itself. Also try to go into the BIOS menu and check whether the Sata ports are in RAID or in AHCI mode.

  3. #3
    Join Date
    Nov 2005
    Posts
    2,496

    Re: Kingston HyperX SSD not recognized in my computer

    I would also suggest you to log into BIOS menu and check if the SSD is set to RAID or AHCI. If you are not running any RAID setup then most probably you will have to set it up for AHCI mode. Incase you are running RAID setup then you may need to enter the RAID BIOS and test whatever needs to be performed to pass the drive through. There are some setings to pass it through and there are others who need to have it setup as a single drive RAID 1.

  4. #4
    Join Date
    May 2008
    Posts
    1,812

    Re: Kingston HyperX SSD not recognized in my computer

    Can you try to perform some power cycles on it by disconnecting and reconnecting the power for 2-3 times on the SSD. Or else you can better try to unplug the SSD for a while, like for a whole day, and then connect it and see if it gets recognized this time. If your Kingston HyperX SSD gets recognized then you should immediately try to update its firmware to the latest version for any further conflict with your new motherboard that you have built recently.

Similar Threads

  1. Among Kingston HyperX Blu & HyperX Genesis which one is better
    By Meherr in forum Official Kingston Forum
    Replies: 7
    Last Post: 10-06-2013, 02:23 PM
  2. Kingston HyperX 3k vs Samsung 830 SSD
    By Harbira in forum Official Kingston Forum
    Replies: 8
    Last Post: 28-05-2013, 03:48 PM
  3. My Kingston 4GB pen drive not recognized in any computer
    By Ojayit in forum Portable Devices
    Replies: 1
    Last Post: 25-04-2012, 06:09 AM
  4. 4GB Kingston HyperX
    By StarTraveller in forum Motherboard Processor & RAM
    Replies: 3
    Last Post: 03-02-2009, 11:04 PM
  5. "Kingston HyperX PC8500 recognized as PC6400
    By Maryna in forum Hardware Peripherals
    Replies: 2
    Last Post: 13-11-2008, 06:01 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,675,195,304.28263 seconds with 17 queries