Results 1 to 4 of 4

Thread: blue screen with Kingston HyperX 3k SSD

  1. #1
    Join Date
    Dec 2013
    Posts
    12

    blue screen with Kingston HyperX 3k SSD

    I recently put in a new Kingston HyperX 3K 240gb SSD in my computer but soon after that I am having too many problems with that. Most of the time many software will freeze up even though I can still move the mouse for sometime and then the whole computer will crash and give me blue screen of death with stop error code 0000F4. After removing the SSD there is no problem using the computer with the hard drive. Can anyone tell me how do I solve this issue? Thanks

  2. #2
    Join Date
    May 2008
    Posts
    1,822

    Re: blue screen with Kingston HyperX 3k SSD

    Did you check whether you have the latest firmware version installed for your Kingston HyperX 3k SSD? If not then try to get it from the Kingston website and install it first. You can also try to update your motherboard's BIOS to the latest version if possible. Also check the Sata ports and its cable whether it is not having any issues. Also go into your BIOS menu and then try to turn on the AHCI and IDE modes. Also try to turn on the TRIM.

  3. #3
    Join Date
    Nov 2005
    Posts
    2,496

    Re: blue screen with Kingston HyperX 3k SSD

    There was an article given on the microsoft website to solve the problem that you are facing, please follow the below troubleshooting method:

    • For Parallel Advanced Technology Attachment (PATA) hard disks, configure your disk drive as master only. For Serial Advanced Technology Attachment (SATA) hard disks, connect the hard disk cable to a master channel SATA connector on the motherboard.
    • Connect another device as a master, such as another disk drive or a CD drive or DVD drive.
    • Change your PATA cables, your SATA cable, or your IDE cable even if the cable does not appear worn.
    • Install Windows on a new hard disk because it is possible that your hard disk or your Windows installation may be corrupted.

    More information is given on this link - http://support.microsoft.com/kb/330100

  4. #4
    Join Date
    May 2008
    Posts
    1,812

    Re: blue screen with Kingston HyperX 3k SSD

    Can you try to do some SSD drive disc check and see the output. To do that first update your SSD's firmware to the latest. After that re-seat the Sata and power cable. Now run this command in CMD "chkdsk /f/r". You can also test the SSD with a software called Seatools available on the Seagate website. Once you have downloaded this tool then burn it to a blank CD and then boot from the CD and wait for it to finish detecting drives and then select Long Test and run it.

Similar Threads

  1. Kingston HyperX 3K vs Intel 530 ssd
    By yamatoeisa in forum Official Kingston Forum
    Replies: 3
    Last Post: 21-12-2013, 10:40 AM
  2. Among Kingston HyperX Blu & HyperX Genesis which one is better
    By Meherr in forum Official Kingston Forum
    Replies: 7
    Last Post: 10-06-2013, 02:23 PM
  3. Kingston HyperX 3K vs OCZ Agility 4
    By Dilbert in forum Official Kingston Forum
    Replies: 3
    Last Post: 06-03-2013, 11:06 AM
  4. 4GB Kingston HyperX
    By StarTraveller in forum Motherboard Processor & RAM
    Replies: 3
    Last Post: 03-02-2009, 11:04 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,674,827,944.50614 seconds with 17 queries