Results 1 to 4 of 4

Thread: Gigabyte GA-Z87-D3HP booting problem while using 4 Dimm slots

  1. #1
    Join Date
    Jun 2014
    Posts
    15

    Gigabyte GA-Z87-D3HP booting problem while using 4 Dimm slots

    Have recently bought this new Gigabyte GA-Z87-D3HP motherboard. After setting up the pc if I am using 4 Dimm slots then my computer will not boot at all. If I am not using all the 4 Dimm slots then my pc will boot normally and I can do whatever I want without any issues. I have seen that many people are also facing this same problem and there hasnt been any solution for it? So, I am just hoping that someone here can find some definite solution for this problem. Thank you

  2. #2
    Join Date
    Sep 2005
    Posts
    1,434

    Re: Gigabyte GA-Z87-D3HP booting problem while using 4 Dimm slots

    This issue is not solely happening to the Gigabyte GA-Z87-D3HP model motherboards but with people who have Z87 boards are also suffering from this problem while using all the 4 memory slots. Some user with Gigabyte GA-Z87X-UD5H is also having constant blue screen of death while using the 4 Dimm. The solution is the same, that is, not to use all the 4 sticks which makes the computer stable, even though choosing any random slots. There are also not any errors with memtest software.

  3. #3
    Join Date
    May 2008
    Posts
    698

    Re: Gigabyte GA-Z87-D3HP booting problem while using 4 Dimm slots

    There is not any known solution for this problem on the Gigabyte Z87 motherboards. But there are some methods that you can use to test if it works or not. Try to go into BIOS and lower the RAM frequency. Just try to increase some voltage or else disable the C-States. Also try to update the BIOS of the motherboard, download their latest beta drivers first and install it in your pc. After that use all the 4 Dimm memory slots and see if that gives you any kind of errors?

  4. #4
    Join Date
    May 2009
    Posts
    1,010

    Re: Gigabyte GA-Z87-D3HP booting problem while using 4 Dimm slots

    First of all you need to make sure that you have the latest BIOS version installed in your machine, that is, GA-Z87-D3HP - F7c, download it from here. After that you must try to enable XMP profile in your BIOS which will setup the other required system voltages. Just try not to use the stability mode, jusy use the XMP. If you dont know how to do that then try to get information from your motherboard manual.

Similar Threads

  1. What Are the different Slots on My gigabyte ga-eg45m ds2h ?
    By Anne Heche in forum Motherboard Processor & RAM
    Replies: 6
    Last Post: 03-06-2011, 07:00 PM
  2. Gigabyte GA-P55-UD4P stops 2 DIMM slots
    By REDBULL in forum Motherboard Processor & RAM
    Replies: 5
    Last Post: 02-02-2010, 09:06 AM
  3. Command to know physical memory in dimm slots on esx servers
    By Knopper in forum Operating Systems
    Replies: 3
    Last Post: 08-08-2009, 01:05 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,714,027,596.01903 seconds with 17 queries