As far as I know I did somehow managed to establish a successful connection with my Netgear WN2000RPT. After I made the connection everything went on smoothly without any trouble at least for few hours but then later on I found that almost all my client machines are connected to this WN2000RPT lost the network completely without any reason. When they tried to reconnect them completely failed to do so. Actually they say that WN2000RPT is not at all allowing them to get connected successfully. Now the most interesting thing is that during this point of stage the main network which I am connected to is working just fine, I am talking about the network that the extender is connected. It simply allows me to connect without giving any sort of trouble which is quite surprising for me.
Another strange thing I have noticed is that if I turn off the WN2000RPT and start it all the way again everything is fixed as if nothing happened. But again later on after few hours of successful connection everything goes off automatically once again. Overall I can say that this issue is never continuous, it repeats within the loop. I am not a technical person so therefore I can’t make out the exact reason for this problem but however I can at least guess out that the issue might be with the router itself, I mean it could be related to the hardware or with the firmware. Or there could also be a possibility that my main network connected to the WN2000RPT is going invalid with the IP address. Some people do suggest me to try out certain different position with the router which might help if lucky enough. Believing that this might help me somehow I tried moving the WN2000RPT both near and far away direction from the main router that is connected, also I tried to set it in the standing direction so that if there is any heat problem then this position might help. But after tried out multiple things nothing worked. As I already said that I am not a technical person therefore I never tried my hands with the Static IP. Really wanted to try my hands on Static IP but the only thing that is restricting me is what could be the IP in case of the Client Device. I explained the entire story from starting to the current situation, there is nothing left from my side. Now the only thing I am expecting is your help. Please if there is anyone who understood my issue and have any appropriate suggestion then let me know. Its not only me with this problem; there are other client machines who are on the same track and I wanted to get them out as soon as possible. I am really worried about the other machines and somehow I wanted to let them access the network successfully without facing any trouble.
Bookmarks