Can anyone help me with the configuration of this router on bsnl broadband connection. Well I am trying this for both wired and wireless connection but don’t know how would I be able to do that any idea?
Can anyone help me with the configuration of this router on bsnl broadband connection. Well I am trying this for both wired and wireless connection but don’t know how would I be able to do that any idea?
Can you please tell me which is the router that you are planning to use for the connection? That’s what I want to know? Anyways I hope that you have got a descent one.
Ok I have got the Linksys WRT 120 N Router for the connection. I think so it is a pretty descent one for the connection. Anyways leave behind the router you just help me with the configuring part. So do tell me something about it. I am waiting for your response.
Hey guys I am having a BSNL's C2110 modem and I want to configure it with the Linksys WRT54G router. So can you all tell me how to configure it. I did refer some articles in the internet to get some help but I was not able to find anything out there, anyways you only can help me with this one.
Hi if you want then you can refer this link How to configure Linksys Router with BSNL Modem for further information. I suppose you will get all the necessary information out there.
Well for the configuring part you need to follow the steps that I am giving you here so hope it is useful for you
1) Go to the routers settings by typing 198.168.1.1 in your web browser.
2) Now you will be getting the setup page of Internet connection Type and then select PPPOE.
3) Now enter whatever userid and password that you have set.
4) You will be going to the Network setup page and there you will have to put up the ip address as 192.168.2.1 and subnet musk 255.255.255.0.
5) Go and enable the dhcp server, add the ip address as 192.168.2.100.
6) Select the appropriate timezone and then save settings.
7) Now in case if your LAN card has manually IP address then you will have to change it to 192.168.2.100 subnet 255.255.255.0 and gateway 192.168.2.1. or if you want then you can click on obtaining ip address automatically. Having done that restart your system.
8) Now you can setup CPE C2110 to bridge mode with VPI/VCI 0/35. Connect the modems lan port with cable RJ45 and the other end to the router. After that connect the LAN port of the router to your Computer LAN port with RJ45 Cable.
Bookmarks