Building configuration...
Code:
Current configuration : 6608 bytes
!
version 12.4
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
!
aaa new-model
!
!
aaa authentication login client local
aaa authorization network vpnclient local
!
aaa session-id common
!
resource policy
!
ip cef
!
!
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool sdm-pool
import all
network 10.10.10.0 255.255.255.248
default-router 10.10.10.1
lease 0 2
!
!
no ip ftp passive
ip ftp source-interface FastEthernet0
ip ftp username [username]
ip ftp password [password]
no ip domain lookup
ip domain name yourdomain.com………….
The ones in italics are ones that I’ve kept in touch with Cisco in my try to do port sending (which plainly didn't work). I was attempting to evacuate them following i missed the mark with port sending, but I was unable to do that too on the grounds that Cisco declares the juncture is "not changing" or something similar to that. Anyhow anyway I trust you are able to spot the things you are searching for in place for us to have the ability to design the NAS and router right.
Bookmarks