Results 1 to 11 of 11

Thread: Failures in Netgear RP614v4

  1. #1
    Join Date
    Jun 2011
    Posts
    77

    Failures in Netgear RP614v4

    I began utilizing RP614v4, was working fine then one day nothing worked out-issue w/ service provider (they resolved it was router, machine can access virtual internet when straightforwardly joined to link modem) spent exceptional part of day w/ netgear tech underpin, diagnosing router issue (router kicked the bucket) they sent me a displacement-never might get it to work. When powering it on the capacity light makes strides toward environmental friendliness and nothing else lights up. I’ve attempted known working machines connecting to lan ports, resets, HARD resets, all useless. Did the RP614v4 all actually quit working for some explanation?

  2. #2
    Join Date
    Jun 2009
    Posts
    1,112

    Re: Failures in Netgear RP614v4

    Well, my RP614v4 has the same issue. The actuality is that I think it holds some situations with the DNS Management, as I am able to gain entrance to web spaces by their IP, but not their realms. Its actually irregular. It could be superb if someone here at netgear could indicate us to the right bearing as this issue is irritating.

  3. #3
    Join Date
    May 2008
    Posts
    945

    Re: Failures in Netgear RP614v4

    I have attempted utilized manual DNS on pc side too, but no impact. I think this model is defective by manufacture, as I saw situations similar to this everywhere on the online internet and no results. I went with a great deal of routers offbeat marks and models, but this is the first time I've met this sort of situation. Well I think I'm determined to purchase an additional router.

  4. #4
    Join Date
    Nov 2009
    Posts
    857

    Re: Failures in Netgear RP614v4

    I suspect I might as well live out the RMA methodology again and converse with Netgear again? I'm on my second not working router, but it doesn't appear supporting when the individual above me is on his third not working router.

  5. #5
    Join Date
    Nov 2009
    Posts
    955

    Re: Failures in Netgear RP614v4

    Just had my RP614-NA router stop working last evening, Initial failure appeared to be run around with the whole front LEDs flashing consecutively, following several capacity cycles just capacity LED lights. Unfortunately, it appears to have been working sensibly well following buy in 5/2007 until now.

  6. #6
    Join Date
    May 2009
    Posts
    1,084

    Re: Failures in Netgear RP614v4

    My router has suddenly locked me out of my satellite connection. Works fine straight connected to utilizing ethernet. The Smart Wizard site (where you config your router) gives off an impression of being down. I have not yet found and response nor an individual or put to get this altered. This began on the 10/25 for no evident explanation. It gives the idea that the Default IP Netgear utilizes-http://192.168.0.1 or 192.168.1.1 are not working at present. I am suspicious that is the issue.

  7. #7
    Join Date
    Jul 2009
    Posts
    1,118

    Re: Failures in Netgear RP614v4

    All link users when u buy any router or anything with a contrasting mac location alternate than your machine you have 2 decisions either powercycle the link modem or clone your PCs mac deliver to the router you do this by sorting in 192.168.1.1.Powercycling is basic well for most individuals but anyway cut all things off on the grid and begin by powering up the link modem then the router then the PC and its that straightforward. Since you have issues with some web pages then drive your DNS on the router in the event that you don't know the DNS the catch the workstation back straight to the modem and open up cmd (charge provoke) sort ipconfig /all and hit drop in and there is a space among the g and the / you will recognize your DNS there.

  8. #8
    Join Date
    Jun 2009
    Posts
    1,205

    Re: Failures in Netgear RP614v4

    Here is the technique:
    • Turn off the cable modem and unplug ethernet link
    • Hold up for few min (5min)
    • Turn on the link modem just and try not to fitting any ethernet link
    • Hold up until every last trace of the light up on link modem
    • ONLY following every last trace of the light is up, catch a router antiquated modem


    You might as well equipped to get available IP from the ISP and it will appear in the router status when you login the router.

  9. #9
    Join Date
    Mar 2009
    Posts
    1,221

    Re: Failures in Netgear RP614v4

    Utilizing PC's mac address under essential setting of the router and give its mac address if standard setup appears not get any free IP to the router for DNS issues. Most fit test is to utilize ISP DNS server or 4.2.2.1/4.2.2.2 on PC's network lands and define it. This will encourage rooting out the issues.

  10. #10
    Join Date
    May 2008
    Posts
    1,304

    Re: Failures in Netgear RP614v4

    I had precisely the same situation. My RP614v4 quit working. Just the capacity light is on and makes a point not to distinguish the virtual internet connection. Modem associated straight to workstation works fine but not through the router. My ISP provider diagnosed as situation in router and inferred to see provided that it is under warranty or get a new one like you inferred.

  11. #11
    Join Date
    Jul 2009
    Posts
    1,179

    Re: Failures in Netgear RP614v4

    I posit my NV is re-adjusting. I accidently cut it on with the drives out. Now drives 1-3 and the capacity bind are on always and drive 4 is flashing. Then again I could not venture to place it in thief and so forth. Since so any plan of to what extent it could take every last one of the four drive are 500gigs. I'm holding up to move my information to my Ultra 4.

Similar Threads

  1. How to connect Netgear WNCE2001 with the Netgear wg602v2
    By Tharaa in forum Networking & Security
    Replies: 5
    Last Post: 22-10-2011, 10:18 AM
  2. Netgear WNCE2001 Wi-Fi Internet Adapter with Netgear WNR2000v2
    By Gaffigan in forum Networking & Security
    Replies: 8
    Last Post: 22-10-2011, 09:51 AM
  3. My XP has Help failures
    By SSupDawg in forum Windows Software
    Replies: 3
    Last Post: 10-03-2009, 10:23 AM
  4. Netgear 802.11n New routers: Netgear WNR2000 and Netgear DGN2000
    By MattyBoy in forum Networking & Security
    Replies: 1
    Last Post: 29-09-2008, 07:59 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,639,001,332.75838 seconds with 17 queries