Results 1 to 8 of 8

Thread: Need help for Setting up printing through FVS336G VPN

  1. #1
    Join Date
    Jun 2011
    Posts
    98

    Need help for Setting up printing through FVS336G VPN

    I have a few FVS336Gs set up. The VPN connection is up and running between both of them. LAN is 192.168.10.x, remote is 192.168.1.x. I posit I need to set up some firewall controls remotely to permit incoming print livelihoods (luckily printing is just going restricted). Do I should set up LAN WAN manages on port 9100? I attempted setting up a tenet in particular for one printer, 192.168.1.100 but strangely enough it broke my outside association to the FVS336G network management page. I sort of gathered that a connection over the VPN could open up every last trace of the ports. Any inferences identified with it?

  2. #2
    Join Date
    Jun 2009
    Posts
    1,205

    Re: Need help for Setting up printing through FVS336G VPN

    Consistent with my learning the standard TCP/IP ports might as well work. Moreover I could take every available opportunity to give you a chance to know that there is no principles require for VPN tunnels for ports.

  3. #3
    Join Date
    Jun 2011
    Posts
    109

    Re: Need help for Setting up printing through FVS336G VPN

    Same with me, I collected the printing could work following I had set up the VPN. I know the VPN is working fine and I've balanced the firewall for both 192.168 subnets but I'm not getting anything when I set up the printers or send a print work. Do I should set up the ports particularly even through the VPN tunnel?

  4. #4
    Join Date
    May 2008
    Posts
    1,304

    Re: Need help for Setting up printing through FVS336G VPN

    In fact I had a comparative sort of scenario, when I attempt pinging nothing returns. There are a couple printers, all relegated static IPs: 192.168.1.50, 192.168.1.100 and 192.168.1.200. Now I doubt that TCP/IP data on those printers isn't set up decently. They may be lost the portal information.

  5. #5
    Join Date
    Jun 2011
    Posts
    101

    Re: Need help for Setting up printing through FVS336G VPN

    Each of the a couple printers had the door insight (192.168.1.1) but still no LUCK. I could probably ping them on the nearby network but not from the remote network.
    Is there anything I need to set in the VPN tunnel settings to construct this work? I peruse fundamentally the whole manual yesterday and it tries not to state much about printing.

  6. #6
    Join Date
    Nov 2008
    Posts
    1,066

    Re: Need help for Setting up printing through FVS336G VPN

    In the event that you have alternate mode on tunnel for example offering via tunnel then tunnels fine and there is nothing you should do. In the event that you are able to ping "any" gadgets from remote then you will have tunnel setup wrong.

  7. #7
    Join Date
    Nov 2008
    Posts
    1,001

    Re: Need help for Setting up printing through FVS336G VPN

    I would be able to affirm that VPNs designed with NetGear DG834G routers have situations with IP Print activity. I hold numerous clients utilizing these units with VPNs that generally work. DNS/AD/RDP/Exchange/SharePoint its all exceptional, but no IP printing. I would be able to design the printers via their network interface, demonstrating that there is no arrangement or tracking issues but IP print activity is simply a founder. I have attempted RAW 9100, have attempted arranging ports alternate than 9100, and LPR; they all miss the mark. Interestingly enough, provided that I telnet the printer on port 9100 it sees to produce a reciprocity. With one client I have subsequent to traded the primary destination's VPN endpoint with an Indian machine, the DG834Gs work (elsewise) faultlessly to make an IPSec VPN, but the IP printing situation remains.

  8. #8
    Join Date
    Jul 2009
    Posts
    1,179

    Re: Need help for Setting up printing through FVS336G VPN

    The IPSec Connection Status Page tells me IPSec SA Established so I imagine that would not joke about this associated, but I still cannot ping the remote network.

Similar Threads

  1. Replies: 2
    Last Post: 11-11-2011, 06:24 PM
  2. Printing MPP files to Adobe and then printing on paper
    By mbbackus in forum Microsoft Project
    Replies: 2
    Last Post: 28-09-2011, 05:40 PM
  3. Unable to install ActiveX-Components- FVS336G SSL VPN
    By aGRaTA in forum Networking & Security
    Replies: 2
    Last Post: 18-09-2011, 11:31 PM
  4. Printing from HTC Evo
    By Delightful. in forum Portable Devices
    Replies: 5
    Last Post: 27-04-2011, 08:26 PM
  5. Setting up Connection using Proxy Setting
    By microam_i in forum Networking & Security
    Replies: 2
    Last Post: 30-01-2009, 03:13 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,638,003,739.49175 seconds with 17 queries