Event 7003 and Event 5719

[Menominee]

I am using a Server which is running on Windows Server 2008 R2. I had setup Active Directory, Domain Controller and DNS on the same. This all is done on DHCP server. Now when I did final installation I am getting two errors. The first is Event ID 7003 and Event ID 5719. I have a another server which is connected to this one and they both have Static IP. The error occurs when I boot the server.

[Sabastiaan]

First check your Ethernet Controller. The same problem occurred on my system some time before. I was using Marvell Yukon PCI Ethernet controller on the server and on other the there onboard connectors. I had updated the drivers of this controller which were outdated and the same not identified by Windows. Try to check that and if possible use the newest Ethernet Controller.

[Huron]

Here is the solution for your error. First restart your system. and then click on StaCollapse. Then go to imageExpand and search the same in msconfig. You can run msconfig directly from Start Menu > Run. You have to open this file and if it prompts you for admin password then provide the same. Not go to General > startup and then look under Selective startup. Remove selection from Load Startup and then go in Service tab. Choose Hide All Microsoft services check box and disable everything. Then restart your system.

[Visala28]

I was having the same issue and for that I used the above solution. Now anyhow the Error 7003 has stopped but there is new problem generated in my system. When I reboot my system I am continuously getting Error 5719. I had tried to fix this by some updates but nothing worked there. The error comes after every reboot. How to fix this.

[teenQ]

I had rebooted the DNS server and adjusted ipconfig settings. The error had stopped but still the server is not working well. I am using Windows 7 on a different computer. First of all the basic step for this is to verify the ipconfig settings. Then check your Domain controller. change the subnet mask and then check back. Provide ipconfig /flushdns and ipconfig /registerdns command and reboot.

[Candace]

In my office there was a bit different setup. I was working on a wireless zone. I am having a wifi router and Windows Server. Because error I shifted to cable support. I had connected the server and other computers on router with cable and now it is working fine. I had updated all drivers which was a important part.

[Carley]

I was irritated with 5719 error on my wired network. I have a laptop running on Windows Server 2008 R2. At fist the error 5719 comes frequently on booting then I bought a new Linksys wireless switch. I plugged all and reconfigured entire thing. I had created a unmanaged network and it work well without any issue.