Results 1 to 3 of 3

Thread: Bios warning message on MSI Eclipse SLI

  1. #1
    Join Date
    Apr 2012
    Posts
    21

    Bios warning message on MSI Eclipse SLI

    I am using the Intel i3 processor motherboard and I am facing a problem in my bios. I am getting a message when I start up my computer. I have is the only two options to press F1 or F2. The date and the time automatically changes to the year 2009. I don’t know how to deal with this problem. Can anyone help in getting out of this problem?

  2. #2
    Join Date
    Jul 2011
    Posts
    456

    Re: Bios warning message on MSI Eclipse SLI

    There are many ways to restore the bios settings. You can try any of them but I suggest you to use the easiest way. Because in it can be done by anyone and no need of hardware expert but requires a little knowledge of hardware. The easy way to restore the bios is clearing the CMOS. To clear the CMOS remove all the power cables from the computer and even the CMOS battery for an hour. This will clear the CMOS and will let you the default bios settings in your computer.

  3. #3
    Join Date
    Aug 2011
    Posts
    305

    Re: Bios warning message on MSI Eclipse SLI

    I was also having the same problem. I restored the bios settings by following the steps.
    1. Power down the system.
    2. Change the bios jumper configuration by moving the pins of the jumper from 1&2 to 2&3
    3. Turn on the computer.
    4. The system should display the splash screen and will automatically go to the bios configuration.
    5. Change the IDG Primary Video Port to Auto.
    6. Change the Primary Video Adapter to Auto.
    7. Exit bios. The system will prompt you to power down the system.
    8. The system will start as normally as it use to start.

Similar Threads

  1. BIOS flash AFU Warning on ms-7519
    By fAROK in forum Motherboard Processor & RAM
    Replies: 5
    Last Post: 07-06-2011, 10:18 AM
  2. Warning Message : Error Code 1
    By Clemens in forum Operating Systems
    Replies: 3
    Last Post: 28-02-2009, 06:29 PM
  3. USB shows warning message
    By JamesB in forum Hardware Peripherals
    Replies: 4
    Last Post: 26-02-2009, 06:32 PM
  4. How to remove Windows warning message
    By Tomthegreat in forum Operating Systems
    Replies: 3
    Last Post: 02-09-2008, 02:21 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,713,625,376.07842 seconds with 17 queries