I am having Gigabyte GA-Z68AP-D3 and I have updated the same with the latest version of Bios. When I am adding Rosewill RC-215 RAID Sata Controller Card on PCI slot the BIOS is not allowing the changes which i wanted to do that is Hard Disk Boot Priority to SSD drive. as I am adding an additinaol PCI SATA RAID controller to PCI slot the system of mine detecting hardware under "Hard Disk Boot Priority" after making the setting BIOS's SATA Controller to AHCI or XHD RAID. Hence I am not able to select appropatiet boot disk/controller/device.
Below mentioned are the system specification.
Intel 2500K ( stock not overclocked)
Gigabyte GA-Z68AP-D3 Rev 1 F6 BIOS (Tried F7e also)
8GB (2x4GB) Crucial Memory DDR3 1600 ( installed main-board slots DDR3_1 & DDR3_2 )
BFG 8800 GT 512 MB Video card PCIex
128GB Crucial M4 (with latest firmware)
(2x) 2 TB Seagate in RAID 1 on Motherboards Intel RAID Controller
1TB Seagate SATA3 6Gb/s
Rosewill RC-215 VIA PCI SATA 1.5G x2 / ATA 133 (IDE) x1 Controller Card
Lite-On DVD Burner
Bookmarks