Getting with error code 30 with ASRock Fatal1ty Z68 Professional Gen3

[Muthukumar]

I have ASRock Fatal1ty Z68 Professional Gen3 motherboard in my computer and am using windows Vista operating system with my computer. Now it has suddenly started giving me problem. now whenever I start computer at that time I get error code 30 and I don’t get display. What should I do to solve this problem?

[crook]

Possibly it can be RAM issue and that is why I will suggest you to remove stick from your computer and after removing that you have to reseat the RAM properly and after that you have to check whether you are getting same problem or not. As far as I know after trying this solution your problem will get solved.

[LavinaD]

Have you tried to solve this problem by clearing the CMOS? If you have not tried then I will suggest you to clear CMOS in your computer and after clearing the CMOS in your problem might get solved. if you have already tried to solve this problem by clearing CMOS and then also same problem is occurring then you have to insert RAM in DRAM slot (white slot) and then you have to see whether it makes any difference or not. you should also check your system with different RAM and then see what the result is.

I hope above tricks will help you to fix this problem.

[Skullnit]

If none of the solution help you to fix this problem then I will suggest you to contact Asrock support and then ask them about the error code 30 which you are facing in your computer. now after that they will give you proper solution regarding this.