Results 1 to 7 of 7

Thread: Gigabyte P67A D3 B3 f4 version slow boot until post screen

  1. #1
    Join Date
    Jun 2011
    Posts
    85

    Gigabyte P67A D3 B3 f4 version slow boot until post screen

    I newly acquired this exceptionally great motherboard and I had no situations whatsoever. It was running with F1 form on bios. I believed that it was exceptional to upgrade to bios F4 subsequent to its most up to date so I did the entire system successfully. From that instant and on I recognized that it sits down to demonstrate to me the post screen (from 10 sec headed off to 20 sec). I upgradeed the reinforcement bios with the F4 form successfully. I did the entire methodology with clear cmos and streamlined defaults. This is incident to each F4 bios versions or just in mine? Any results of in what manner would i be able to make it boot quicker like ever?

  2. #2
    Join Date
    May 2008
    Posts
    1,304

    Re: Gigabyte P67A D3 B3 f4 version slow boot until post screen

    The just choices I am able to consider are to verify that there is no floppy drive prepared and the splash screen and so forth is impaired. In addition prepare quickboot.

  3. #3
    Join Date
    Nov 2008
    Posts
    1,066

    Re: Gigabyte P67A D3 B3 f4 version slow boot until post screen

    Well I figured what is going on with the moderate boot! When I press the capacity bind the framework begins and following 5-6 seconds in dark screen and before post/splash screen its restarting again for no explanation. You need to be quite great in ears to listen that the pc restarts since the motherboard's speaker creates a particular small sound come what may I manually restart my framework, fans and leds are working at the same time as this restart!

  4. #4
    Join Date
    Jun 2011
    Posts
    109

    Re: Gigabyte P67A D3 B3 f4 version slow boot until post screen

    Ordinarily its suppose to do 5-6 sec to reveal to me the post and splash screen but as a substitute for that it restarts again and sets aside a few minutes which is about 10-12 sec to demonstrate to me present and splash screen and catch the 1 beep. Which is pretty moderate? When that it boots windows truly snappy and the framework is absolutely stable

  5. #5
    Join Date
    Nov 2008
    Posts
    1,001

    Re: Gigabyte P67A D3 B3 f4 version slow boot until post screen

    There is nothing the matter with the best versions in across the board. I run every one of them the time without any situations. You possess the Backup BIOS to fall once more on if there was a situation anyway. The following thing to attempt is to clear the CMOS. If its not too much trouble take after the proposed directions precisely. Uproot the capacity link from the mains supply and afterward press the capacity switch taking care of business regarding this issue for a few seconds just to empty any lingering power in the PSU capacitors.

  6. #6
    Join Date
    Jun 2009
    Posts
    886

    Re: Gigabyte P67A D3 B3 f4 version slow boot until post screen

    • Once done, evacuate the motherboard electric cell for anyhow one hour before trading it
    • Following connect back to the mains supply and boot.
    • You will now should drop in the BIOS by pressing DEL and stack Optimized BIOS Defaults.

  7. #7
    Join Date
    Aug 2009
    Posts
    922

    Re: Gigabyte P67A D3 B3 f4 version slow boot until post screen

    Produce whatever possible updates to the BIOS settings to suit your self such as incapacitating the floppy drive, impairing the full screen logo and making the HDD the essential boot mechanism then after that press F10 to save and exit.

Similar Threads

  1. Facing constant pre-post boot cycle with Gigabyte GA-P55M-UD2
    By Gulbulay in forum Motherboard Processor & RAM
    Replies: 7
    Last Post: 12-04-2012, 05:58 AM
  2. Unable to POST on Gigabyte P67A-UD5 inserting PCI video card
    By Maq-Bool-Ji in forum Motherboard Processor & RAM
    Replies: 4
    Last Post: 10-04-2012, 05:14 AM
  3. How to setup UEFI on gigabyte ga-p67a-ud7-b3 for raid boot
    By Hadriel in forum Motherboard Processor & RAM
    Replies: 6
    Last Post: 10-07-2011, 09:42 PM
  4. MSI P67A-C43 suddenly powered off, neither post nor boot
    By Gmaria in forum Motherboard Processor & RAM
    Replies: 3
    Last Post: 08-06-2011, 01:34 PM
  5. Slow Post/Boot on IBM 8187
    By neumannu47 in forum Motherboard Processor & RAM
    Replies: 1
    Last Post: 03-11-2010, 03:44 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,639,000,988.22931 seconds with 17 queries