Does my RAM even reach this speed on my board?

[Woraug]

This is my own fault, for not reading more of the reviews of the RAM before I bought it, but now I'm stuck so I'm going to try anyway.

I have this board:ASUS M4A88TD-V EVO/USB3
http://www.newegg.com/Product/Produc...82E16813131646

And This RAM: CORSAIR XMS3 8GB
http://www.newegg.com/Product/Produc...82E16820145325

With This CPU: AMD Phenom II X6 1100T
http://www.newegg.com/Product/Produc...82E16819103913

Is it at all possible to get it to 2000mhz? I've seen that it can be done on the Crosshair IV. If you have it, what are your settings? I've never really toyed with OCing before, though I do get the basics. This is quite frustrating.

[Spyrus]

I think that you can overclock your CORSAIR XMS3 Ram, give the below settings a try in the bios:

BCLK Frequency			[200]
PCIE Frequency			[100]
DRAM Frequency			[2005]
UCLK Frequency			[4009]
QPI Link Data Rate		[7218]

CPU Differential Amplitude	[Auto]
CPU Clock Skew			[Auto]
IOH Clock Skew			[Auto]
------------ Extreme Engine Digi+ ------------
Digi+ PWR Mode			[T-Balanced]
PWR Volt. Control		[Auto]
Load-Line Calibration		[Full]
CPU Voltege OCP			[Enabled]
CPU PWM Frequency		[1000kHz]

Extreme OV			[Disabled]
Extreme OC			[Auto]

CPU PLL Voltage 	1.812	[Auto]
QPI/DRAM Core Voltage	1.415	[1.42500-1.4560]
DRAM Bus Voltage	1.654	[Auto]    [1.650-1.6540]

>DRAM REF Voltages----------------------------
DRAM DATA REF Voltage on CHA	[Auto]
DRAM CTRL REF Voltage on CHA	[Auto]
DRAM DATA REF Voltage on CHB	[Auto]
DRAM CTRL REF Voltage on CHB	[Auto]
DRAM DATA REF Voltage on CHC	[Auto]
DRAM CTRL REF Voltage on CHC	[Auto]
----------------------------------------------

IOH Voltage		1.244	[Auto]
IOH PCIE Voltage	1.508	[Auto]

ICH Voltage		1.111	[Auto]
ICH PCIE Voltage		[Auto]

---------- Spread Spectrum Control -----------
CPU Spread Spectrum		[Disabled]
DRAM Spread Spectrum		[Disabled]