Results 1 to 7 of 7

Thread: GA-MA785GMT-UD2H Motherboard with no Video

  1. #1
    Join Date
    Mar 2010
    Posts
    190

    GA-MA785GMT-UD2H Motherboard with no Video

    I have new gigabyte motherboard GA-MA785GMT-UD2H and have install the Windows 7. It was working fine until I have booted it up. The screen just black out while the mouse cursor is seen on the screen as if it is loading windows but after long hours the nothing can been seen. I have tried with BIOS default setup and also tried different monitor and graphic card but the problem remain the same.

  2. #2
    Join Date
    May 2009
    Posts
    979

    Re: GA-MA785GMT-UD2H Motherboard with no Video

    For running the video card on GA-MA785GMT-UD2H Motherboard, make it sure that you are using the latest updated BIOS and the drivers for the video card. Even though Windows 7 is already packed with all latest drivers. Also try to get changed your RAM or try to clean the RAM with soft cloth or with the eraser, this may also helps to fix with the video problem.

  3. #3
    Join Date
    May 2009
    Posts
    1,010

    Re: GA-MA785GMT-UD2H Motherboard with no Video

    In our computer display consists of two part a graphic card and the monitor .The windows need drivers to work and major display problem occurs due to incorrect, corrupted, or missing video drivers files.You can get these drivers from the official website of gigabyte. The fixing of these drivers will solve the video problem in Windows 7.

  4. #4
    Join Date
    May 2009
    Posts
    857

    Re: GA-MA785GMT-UD2H Motherboard with no Video

    In order to get repair with the video card problem, first try to re-set the video card again .If that doesn’t work make an effort resetting the BIOS through the clear BIOS jumper on the board, it is mostly needed when you install a new CPU.You just Make in no doubt your vga card is installed properly and don't forget to reorganize your Bios with the clear CMOS jumper.

  5. #5
    Join Date
    Aug 2009
    Posts
    922

    Re: GA-MA785GMT-UD2H Motherboard with no Video

    In your motherboard there is an internal speaker and when you switch on the PC, there is an endless strings of beep which states with the problem of Ram or video. I constantly reseat the video adapter or the RAM, paying particular notice to the locking levers on the memory sockets

  6. #6
    Join Date
    Mar 2010
    Posts
    1,003

    Re: GA-MA785GMT-UD2H Motherboard with no Video

    You can try Hot CPU Tester which test your PC’s processor and the motherboard. It is available at reasonably priced and you can a tryout copy of it which can be downloaded from the internet. Checking your processor and the motherboard will let you know whether your motherboard is working properly or not which will help you to get fix with the no video problem.

  7. #7
    Join Date
    Mar 2010
    Posts
    678

    Re: GA-MA785GMT-UD2H Motherboard with no Video

    The configuring of motherboard PCI cards can occasionally be the tricky part for the user. It depends upon the add-on hardware parts you are using like sound, video etc which might be having a conflict with the other component. If you expect an add-on card is the problem, make sure that you have downloaded the most up-to-date drivers for it and re-install it. But still you are facing the same problem then try to fix it to a different PCI slot.

Similar Threads

  1. Replies: 4
    Last Post: 12-01-2011, 10:14 AM
  2. Beep codes in System build with 880GM-UD2H motherboard
    By Karumbu in forum Motherboard Processor & RAM
    Replies: 3
    Last Post: 11-01-2011, 07:38 AM
  3. GA-MA785GMT-UD2H memory issues
    By GreatThinker in forum Motherboard Processor & RAM
    Replies: 6
    Last Post: 04-09-2010, 08:10 AM
  4. Gigabyte GA-MA78GPM-UD2H Motherboard Driver Problem
    By Bhardwaj in forum Motherboard Processor & RAM
    Replies: 5
    Last Post: 11-03-2010, 08:10 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,714,140,641.62011 seconds with 17 queries