WARNING!!!! NO GFX CARD BENCHIES HERE......
here is my system :
P3 500MHz o'ced to 620MHz
810 mobo
256MB SDRAM CL2
all temps were abt 35 degs during and after benchmarking.
Lets see who is the king
WARNING!!!! NO GFX CARD BENCHIES HERE......
here is my system :
P3 500MHz o'ced to 620MHz
810 mobo
256MB SDRAM CL2
all temps were abt 35 degs during and after benchmarking.
Lets see who is the king
a sisoft sandra only benchmark thread ? whill try later
my memory just sux...
Here we are.... can someone view this and tell me is these scores good or bad, and any idea about improving them?
Also, in my memory test, it gives efficinecy as 70%. is there a way to improve this?
http://forums.techarena.in
not necessarily sisoft....any benchies....EXCEPT gfx ones.....Originally Posted by bottle
hmm...i see rave rejoicing
P}{oton, ur scores are less than mine
Atlast, my scores are better than someone.....
http://forums.techarena.in
P4 2.4C @ 3.2GHZ...hehehe i have darky's p4 now....running steady @ 3.2 at stock vcore...normal temps r 32-33c n 38-40 @ load..
Here u go... not bad scores i guess..
My Rig:
Barton 2500+ @ 2259MHz (11x215)
A7N8X Dlx 2.0
3x256MB RAM @ CL2.5-4-3-7
Last edited by taylor; 23-10-2004 at 01:44 PM.
- Not calculated. [ 16K]
- Not calculated. [ 32K]
- Not calculated. [ 64K]
- Not calculated. [ 128K]
- Not calculated. [ 256K]
- Not calculated. [ 512K]
+ 000h 00m 51s [ 1M]
- Not calculated. [ 2M]
- Not calculated. [ 4M]
- Not calculated. [ 8M]
- Not calculated. [ 16M]
+ 000h 44m 16s [ 32M]
These r super pi results
SandraRam)
ALU:2815
FPU:2581
Will post detailed bencies later.
Rig:
TBred-B:11X186
A7N8X-X
512Mb KVR at 186 2.5-3-2-11
Old GF3 64Mb
80gb samsung PATA HDD
Thats decent enough on a nForce2.Originally Posted by undertaker
Have u tried tighter timings than that 11?Originally Posted by undertaker
Hey appollyon...u seem a That 70s Show fan
Me 2 a That 70s Show fan
Do u have/want eps of T7S??
well, how to increase the memory bandwith's efficiency?
http://forums.techarena.in
Here are my bechmarks. Using the machine in sig and Sandra Prof 2004.
Stock (FSB 200, Mem 1:1)
CPU Arithmetic Benchmark -Dhrystone- 7194 MIPS
- Whetstone- 3006/5269 MFLOPS
Multimedia- Integer- 18391
Float- 26649
Memory Bandwidth Int Buff - 4761
Float Buff- 4755
Overclock (FSB 210, Mem 1:1)
CPU Arithmetic Benchmark -Dhrystone- 7794 MIPS
- Whetstone- 3012/5476 MFLOPS
Multimedia- Integer- 19305
Float- 27923
Memory Bandwidth Int Buff - 4695
Float Buff- 4675
Overclock (FSB 220, Mem 1:1)
CPU Arithmetic Benchmark -Dhrystone- 7890 MIPS
- Whetstone- 3201/5763 MFLOPS
Multimedia- Integer- 20258
Float- 29379
Memory Bandwidth Int Buff - 4939
Float Buff- 4937
Comments/suggestions are welcome. Posting the CPU Arithmetic Benchmark Screenshots for stock and overclocked speeds.
Edit: I lose PAT or Performance Mode once I cross FSB 200
Last edited by Pagladashu; 23-10-2004 at 02:30 PM.
My Main Computer
P4 2.4C, Asus P4P800 Deluxe, Zalman Alcu7000A HSF, 2X256 MB Crucial and 2X256 MB Corsair DDR 400 RAM, Radeon 9500 Pro, LOGITECH MX 510 mouse, Antec Smartpower 350 watts, Seagate and Samsung 7200 rpm HDD-80 GB each, SyncMaster 763MB monitor, Samsung CD writer, Altec Lansing ATP 3 speaker.
my sucky scores , p4 2.8b running at 154fsb (3.2g)
CPU Arithmetic Benchmarks :
Dhrystone ALU : 8724 MIPS
Whetstone FPU : 2408 MFLOPS
iSSE2 : 4405 MFLOPS
Memory Bandwidth Benchmarks :
Int Buff'd : 3712 MB/s
Float B : 3708 MB/s
CPU Multimedia Benchmark :
Integer : 20236 it/s
Floating-Point : 25314 it/s
Last edited by bottle; 23-10-2004 at 03:02 PM.
For The Mask:
Quote" Have u tried tighter timings than that 11?"
Well nforce2 has the optimum tRAS value of 11.Even on Nitro memory(or BH5)its recommended to use 2-2-2-11 on an nf2 system.
NforcersHQ seems to agree on this too.
I notice a great jump in Memtest86(over 100MBPS!!!) in going from any other tRAS value to 11 and a small(10-20 MBps)in Sandra.
Bookmarks