Single pcb gtx 295 sli with 2 pcb gtx 295

[WajeehT]

Hi,
I have a Double PCB GTX 295 GPU support on my PC. I wonder weather if Single PCG GTX 295 will work on the same via SLI. I had just recently purchased the card and need information on the settings and services. There might not be much issue in relation to this because both belongs to similar configuration. What you think in the same manner.

[MaCiNToSHeR]

The Leadtek WinFast GTX 295 GPU has two GT200b etched into 55 nm and operating at 576 MHz with a total of 240 stream processors to 1 242 MHz. They are supported by 1 792 MB of GDDR3 memory clocked at 2 016 MHz on a dual 448-bit memory interface. It retained the active cooling system of reference and provides two DVI outputs.They work on SLI without issues.

[OS-X-10+]

NVIDIA has the intention to propose soon a simple version of its PCB high-end graphics card with two GPUs, the GeForce GTX 295. Interest of such a card is lower production costs, since you no longer need to make two PCBs as with the current GTX 295 and that can be satisfied with a simple cooling device. By default, the operating frequencies of the card are identical to those of the current GTX 295.

[xanix]

Both are same card but the only difference is that they have different PCB. te card is not longer and always measured 27 centimeters. As predicted by cons, the frequencies also remain the same and both GPUs running at 576/1242/999 MHz and therefore understand each 240SP. As you can see from the photos there is a single fan, but the two GPUs are connected by an NF200 chip are accessed via a sink.

[CAILYN]

The cards are less expensive and only have some difference in the PCB settings. The single GTX 295 PCB should have a lower sales price and better compete with the Radeon HD 4870 X2. The card still uses an 8 pin plug + 6 pin and a version using a cooling water is provided. The GTX 295 single PCB will be available here shortly at the same frequencies and with the same amount of memory that the GTX 295 already on the market.

[CACTUS101]

It works well on SLI without issue. There is a bit design change in comparison to design and nothing is so different. It offers you a 1792 MB of GDDR3 on 448-bit bus frequency are revised up to 1.1 GHz (instead of 1 GHz). The GT200b are still clocked at 576 MHz and 240 stream processors at 1242 MHz. This graphics card still requires two PCIe power connectors, one 8 pin and 6 pin.