How to access Motorola Canopy from Windows 7

[laljit]

I have installed the Windows 7 on my computer and want to make use of the Motorola canopy with the help of windows 7. I have no idea about this and so I need some suggestion from you people. Also post some more information about Motoroal Canopy. Please reply as soon as possible.

[Hadassah]

For this, you will have to set the IP address manually. You have to change the IP to some other which is a bit less than the original like 192.168.x.x address. This must be less than the router range. I hope that this will be helpful to you.

[Itachi Uchiha]

The network design makes installation of the product simple. It is not necessary to lay or bury cables, nor install microwave links or software, the equipment has been streamlined to the maximum, including installation and deployment assistance. A Canopy system in one place can quickly begin to serve a community that is within 3 kilometers (2 miles) in the band 5.2GHz and up to 16 kilometers (10 miles) when using passive reflector in the band 5.7GHz. Moreover, the modules Canopy Access Point include all management and diagnostic capabilities of the network you need to control and monitor remote network.

[Dorothy Gale]

Here are the strengths CANOPY :

• No license Request
• Canopy uses the free frequencies 5.4 GHz and 2.4 GHz
• No special knowledge required
• The Canopy products are simple, modular and quick to install
• No big investment
• The costs of "start-up" of a Canopy system are lower than any other wireless solution
• No complex infrastructure
• Your Canopy system can be installed and operated in one day!
• Are not required and large cabling is not required to install any software.
• Advance versions are WiMAX ready

[Abeni]

The Motorola Canopy system is composed of three elements: a small outdoor peripheral module SM "Subscriber Module", access points AP "Access Point" for the realization of multipoint connection point. The architecture can be either point to point and point-to-Multipoint and can reach long distances. The main feature of Canopy is to allow easy and safe installation in an outdoor environment. The devices with integrated antenna is very small and can be installed in harsh environments with temperatures ranging from -40 ° C to +55 ° C. Another important advantage of the equipment is the type of connection required for installation: a single RJ45 UTP data cable, which can be up to 90m, through which you can transfer the power and the necessary network connection.

[Dakshayani]

I would like to post some advantages and disadvantages:

Advantages:

• More efficient to connect a large number of users
• Always Connectivity with cable

Disadvantages:

• Requires a critical mass of users to be economically beneficial
• The distance to the user's point of broadband access is limited.

[Farzana]

The Access Point (AP) is the base station that can incorporate between one and twelve transceivers. Each AP transceiver operates with a direction of 60 degrees from the antenna to provide coverage of a sector. Each AP transceiver sends more than 6.5 Mbps data connectivity through up to 200 subscribers. The AP operates with a cup of radio frequency (RF) of 10 Mbps and covers approximately 3.2 or 16 km, depending on configuration. Each AP transceiver requires a power supply 24-volt (included in AP installation kit) and provides a simple connection 10BaseT/100BaseTX.

[Bartolomeo]

The Canopy wireless system is an innovative solution to wide band of Motorola, a global leader in wireless systems. These systems operating in the 5.4 GHz band (Hiperlan) for license-free use. Motorola Canopy is made ​​up of three simple elements consist of small outdoor modules: a module called peripheral MS, "Subscriber Module", a form of access for the construction of point-to-multipoint connections, called the AP, "Access Point", and a module for the backbone realization of Point to Point, called BH "Backhaul Unit."