BSNL Broadband configuration in D-Link DSL-2520u Router

[Troy1]

Recently I have purchased a D-Link DSL-2520u and urgently require configuration for BSNL Broadband. I have done diagnostic test for the same and the results were 'Test with supplied IP:FAIL. All the other test results were PASS. Also I would like to tell you that the Power, LAN and the Dsl Indicator having Green Lights. The Internet Indicator light is red and Status light is off. Please provide help!

[Dorothy Gale]

After reading your question I would like to notify you that I had the same problem as you. To solve it I have contacted the D-Link customer care and they suggested me to contact the BSNL Broadband and ask them for MAC binding. MAC binding is necessary to Configure your D-Link DSL-2520u. My problem is solved and I had the same DLink router as you.

[Abeni]

This modem has around for something greater than 5 years with offbeat names and Dlink has a little while ago put in 3002-g4 moreover.

• Attempt 192.168.1.1/main.html for propelled alternatives.
• In the event that you are utilizing Dialer mode switch to PPPoE mode
• ( drop in userid/PW in wan page )
• Present as screen shot Device insight. or copy/paste information.
• Hold up and than Device Info

[Baisakhi]

Your device configuration format should look like the below:

Device Info

• Board ID: 96338L-2M-8M
• Software Version: 3.12L.01.A2pB023k.d20k_rc2
• Bootloader (CFE) Version: 1.0.37-0.7

This information reflects the current status of your DSL connection.

• Line Rate - Upstream (Kbps): 507
• Line Rate - Downstream (Kbps): 2042
• LAN IPv4 Address: 192.168.1.1
• MAC Address: 00-1e-40-ba-cc-44
• Default Gateway: 117.193.32.1
• Primary DNS Server: 218.248.255.147
• Secondary DNS Server: 218.248.255.146

[Dakshayani]

ISP,s in india began tying MAC locations from final year as cyber unit ask ISP's to control the user datbase.and ISP,s likewise would like to control the no. of users. it is in addition a security mechnisam. This is the purpose behind which we need MAC tying.

[AbhayD]

Please Recheck WAN settings - You will find it in advance option/
Obtain IP address automatically button to be selected.
or report WAN status here. Also check MTU value.

DEvice Info route:

• Destination Gateway Subnet Mask Flag Metric Service Interface

117.193.48.1 0.0.0.0 255.255.255.255 UH 0 br_0_35 ppp_0_0_35_1
192.168.1.0 0.0.0.0 255.255.255.0 U 0 br0
0.0.0.0 117.193.48.1 0.0.0.0 UG 0 br_0_35 ppp_0_0_35_1

[Rajesh4mLA]

My situation is determined. I took the modem to BSNL office and they designed it quickly, now it is working fine. The situation was identified with MAC address tying, as sharp out by D-Link client forethought private. Every last trace of the credit heads off to the BSNL Broadband.